新闻中心
What are the benefits of using hot melt adhesive for packaging? When a business is just getting started, it needs a great deal of originality, courage and the ability to make full use of the things around it. When delivering products to customers, the issue of product packaging comes into play.
However, once enterprises make significant progress and shift from intermittent transportation to transporting medium quantities of products, the tape will start to generate a large number of hidden costs – from disruptions when the tape dispensers run out to the workflow, and then to the total cost – the tape itself. A developing enterprise needs a package seal with quality assurance – so that it can ship anytime and anywhere without worrying about affecting orders. At the same time, it needs to do this reliably and cheaply.
Defects of tape packaging
Temperature changes can cause severe damage to its bonding surface, or using the tape at the wrong Angle may also damage the integrity of the packaging. Moreover, it may mask the brand logo on the packaging material. Additionally, sealing the box with tape can cause customers to be troubled by opening it.
Hot melt adhesive packaging solutions
The cost of hot melt adhesive packaging is approximately one third of that of tape packaging. This packaging method is safe for the product (no one will cut it with a knife or open the box), and the packaging process is faster and the bonding effect is better when using hot melt adhesive for packaging.
Direct answer: For paper bag rope adhesion, hot melt adhesive particles with high initial adhesion, good flexibility, and a softening point of 75-85 ℃ should be used. The diameter of the adhesive point should be 8-12mm, with one point at each rope hole. Press and hold for 3-5 seconds.The key is not in the amount […]
Since medical hot melt adhesives directly act on the surface of the human body, the standards and requirements for this type of hot melt adhesive are very high. So, what are the specific standards? 1. Adhesion Different people have different skin types, such as dry and oily, thick and sparse body hair, smooth and rough. […]
What do we need to inspect when replacing the adhesive particles for book and magazine packaging and making samples? Directly provide the list: When changing the glue or selecting a new supplier, a sample must be made and checked before formal productionAdhesive strength, page flipping flatness, appearance of book back, temperature resistance, opening time, odor, […]
Direct answer: The impact is significant. The direction of the book page threads should be parallel to the spine (straight), so that the paper is less likely to arch along the spine, the adhesive layer is evenly stressed, and the folding life is significantly longer; Books bound with horizontal threads have high page turning resistance […]
