新闻中心
When the temperature is high,Hot melt adhesive granulesThe surface will slightly soften and adhere to each other, with severe cake formation throughout the bag, blocked feeding ports, and uneven adhesive glue. This is not a quality issue, the main reason is that the “storage temperature” and “softening point” are not aligned.

| Scene | Suggestion |
|---|---|
| Room temperature warehouse, ordinary production line | Select conventional EVA pellets with a softening point above 85 ℃ |
| Workshop without air conditioning, high temperature in summer | Choose high softening point (95 ℃+) or PO type for better temperature resistance |
| Slight clumping has occurred | After sieving and manually breaking apart, use it as soon as possible to avoid material jamming in the melting tank |
Sunlife hot melt adhesive provides high softening point books, magazines, and packaging pellets for the high temperatures in southern summer. Guangzhou Sunlife Trading can recommend grades according to your warehouse conditions to reduce clumping from the source.
Q1: Can it still be used if it’s clumped?
Slight clumping can be used for sieving; Hard cake like material is recommended to be discontinued to prevent blockage.
Q2: Is it the same reason for becoming brittle in winter?
On the contrary, winter is characterized by low temperatures and brittleness, while summer is characterized by high temperatures and softness, both of which are related to the softening point.
Q3: Is it feasible to temporarily store ice in the freezer?
Short term cooling is possible, but when removing it, it should be warmed and moisture-proof to avoid condensation water entering the adhesive.
How to distinguish the quality of book binding glue? The hot melt adhesive used in books is divided into backing adhesive and edge sealing adhesive According to the thickness of different materials of paper and books, book adhesives with different viscosities and flow effects can be used to complete the bonding work of book pages. […]
Hot melt adhesive particles are solid adhesives that are heated above their melting point before being applied to a substrate. According to the desired application, hot melt adhesive has various appearances and textures. They do not require a curing or drying period as they quickly solidify when cooled to the freezing point. Therefore, hot melt […]
Based on thermoplastic polymers, the properties of hot melt adhesives allow them to melt at high temperatures and then return to a solid state when the ambient temperature is reached. Hot melt adhesive has a wide range of applications, and its formula has obvious advantages over traditional adhesives. They can be combined with almost anything, […]
plum rain seasonHot melt adhesive granulesAgglomeration, mostly not due to glue spoilage, but ratherMoisture absorption+temperature fluctuationCausing mutual adhesion between particle surfaces. The principle of handling is simple: mild adhesion can be spread out and left to air, and after being dispersed, it can be used as usual; If there is obvious moisture absorption, whitening or […]