新闻中心
A small household appliance factory’s finished product boxes weigh 18 kilograms per box and are stacked in six layers in the warehouse. Use the original oneHot melt adhesive granulesAfter sealing and passing the factory inspection, the bottom box can be stored in the warehouse for two weeks. The seams of the top cover of the bottom box are gradually pushed open, forming a 2-3cm “mouth opening”. The cost of rework and resealing is not small. The problem lies in only assessing the sealing strength, without assessing the creep resistance under long-term stacking.

Technicians from Guangzhou Sunlife Trading brought samples to the factory for a control experiment: the original adhesive was changed to continuous adhesive strips along both sides of the box mouth, and the amount of adhesive applied was increased from 0.8g to 1.4g/box. At the same time, the heavy-duty sealing brand with high holding viscosity and softening point above 95 ℃ was replaced. Sunlife hot melt adhesive provides comparative data on the adhesion of three grades at a constant temperature of 40 ℃, and directly selects the one that meets the six layer stacking requirements.
| project | original plan | adjusted |
|---|---|---|
| Six layer stacking for 14 days | Bottom layer about 3.5% open mouth | 0 mouths open |
| Maintain a constant temperature of 40 ℃ for 7 days | Significant displacement of seams | No displacement |
| 1-meter drop | Qualified | Qualified |
| Cost of glue per box | benchmark | +0.6 points per box |
The conclusion is very solid: heavy box stacking does not focus on instantaneous tensile strength, but on the adhesion and creep resistance at high temperatures; Each box of glue costs less than a penny more, saving the entire batch of rework.
One is to inform the supplier of the actual working conditions: single box weight, stacking layers, maximum warehouse temperature, and storage period, which determine the direction of the brand; Secondly, it is required to conduct simulated stacking verification by placing heavy weights on the sample box for one to two weeks, which is closer to reality than the instantaneous tensile force in the laboratory; Thirdly, the width of the box opening overlap should also be taken into consideration. When the overlap is too narrow, even the best glue cannot withstand the stretching force.
Q1: What are the main indicators for selecting adhesive for heavy-duty boxes?
Check the adhesion and softening point, and request the supplier to provide retention data at high temperature and constant temperature, rather than just looking at tensile strength at room temperature.
Q2: Can stacking layers be solved by adding glue?
Adding quantity is helpful but limited. When the adhesive type is incorrect, priority should be given to changing to a higher adhesive grade and then pairing with continuous adhesive strips.
Direct answer:Hot melt adhesive pelletsThere is no standard answer to ‘the faster the better’ for the curing speed of. Book and magazine packaging usually requires an opening time of 3-8 seconds and a complete curing time of 10-20 seconds; Sealing and pressing require 1-3 seconds for shaping. Curing too quickly, the glue has not yet […]
Direct answer:hot melt adhesiveThe correct usage of particles can be concentrated into six steps – selecting the type according to the live parts, controlling the temperature within the recommended range, adding small amounts multiple times, controlling the opening time for pressing, keeping the glue pot clean, and not repeatedly returning the remaining glue to the […]
Why do recipe books always start with the spine of the book? Let’s start with the conclusion:The recipe menu book is frequently used and often contaminated with oil and water vapor. Ordinary book and magazine adhesive particles cannot withstand repeated folding and oil pollution erosion. After replacing it with specialized hot melt adhesive particles that […]
Return event process A packaging factory in Guangzhou has been supplying sealed boxes to a daily chemical brand in the north for a long timehot melt adhesive pelletsThe southern region has been warm throughout the year without any problems. A batch of goods was sent to the Harbin warehouse in winter, but the customer reported […]