新闻中心
The opening time and solidification time are important specifications for selecting suitable EVA hot melt adhesive for specific applications. Choosing adhesive that meets the specifications will be one of the factors in achieving the required adhesive force.
Opening time:Defined as the time it takes to apply adhesive to the surface of a material until it forms a bond with other surface materials..
Solidification time:defined as the time required for two surfaces to form a bond and produce satisfactory adhesion..
The setting time and opening time depend on four main factors:
The current types of hot melt adhesives include EVA based adhesives, polyolefin based adhesives, polyurethane based adhesives, and polyamide based adhesives. Each type of adhesive has its own characteristics of opening time and solidification time. Most EVA hot melt adhesives have longer opening and setting times than other adhesives.
There are multiple methods to determine the opening time and setting time of glue. At the softening point, it becomes softer and flows into the flow when it reaches the melting point. Then, as it cools, the circulation moves the resilient material away from the melt.
Determine opening hours:
Apply adhesive to the surface of the material.Confirm setting time:
Spray the adhesive onto the surface of the material. Simultaneously place another surface on the bonding surface. Pressing time (2 seconds, 4 seconds); Seconds, 6 After a few seconds, we tore open both surfaces of the material. Dry and completely tear off the paper sample (in the shortest possible time), select the sample to determine the setting time of the adhesive.Whether using hot melt adhesive for packaging, automotive, printing materials, or any other adhesive application, details are important. The good case is that inefficient use of adhesive can lead to waste – the bad case is that it can cause system problems, thereby increasing costly downtime. One of the common problems encountered with hot melt […]
Direct answer: The impact is significant. For every 10 ℃ decrease in workshop temperature,hot melt adhesiveThe actual opening time has been reduced by about 30-40%; When the relative humidity exceeds 75%, the moisture content of the paper increases, and the wetting and penetration of the adhesive will deteriorate. The performance of the same batch of […]
EVA hot melt adhesiveWhat are they made of and can they be recycled? The difference between biodegradable and bio based packaging follows a global trend where consumers want to produce and purchase more environmentally friendly products. The awareness and recognition of more environmentally friendly and sustainable packaging materials (such as reusable, biodegradable, etc.) are growing, […]
EVA polymer hot melt adhesive is solvent-free, anhydrous, and 100% solid meltable. Main ingredients: resin, adhesive, viscosity modifier, antioxidant, etc. Fischer Tropsch wax in productionEVA hot melt adhesiveAs a viscosity modifier, it mainly reduces the viscosity of polymers and increases fluidity. EVA hot melt adhesiveTypes of viscosity modifiers: Commonly used viscosity modifiers include paraffin wax, […]
