新闻中心
Thread-sewn perfect bindingStill need to use hot melt adhesive particlesThe only difference is the dosage and location compared to wireless adhesive packaging. The sewing thread connects the book stickers one by one, solving the root problem of loose pages in the text; But the smoothness of the book back, the fit between the spine and the cover, and the stiffness of the finished product still rely on hot melt adhesive. Simply put, lock thread is responsible for “preventing pages from falling off”, while hot melt adhesive is responsible for “shaping the book”. The two are not interchangeable.
On the actual production line, hot melt adhesive particles are mainly used in three positions:
| Comparison item | Thread-sewn perfect binding | perfect binding |
|---|---|---|
| Glue usage | Less (book stickers sewn together) | More (completely glued into books) |
| Opening hours | Moderate enough | Strict requirements, matching machine speed |
| Page drop risk | Low, adhesive only assists | High, glue is the main force |
| Suitable category | Albums, yearbooks, textbooks | Paperback book, instruction manual |
When making lock thread adhesive, priority should be given to selectingMedium to low temperature, good fluidity, and strong permeabilityEVA hot melt adhesive particles to avoid high viscosity clogging of grooves; If the hardcover book ring lining and stopper cloth are fixed, use a model with higher initial adhesion. Guangzhou Sunlife Trading (Sunlife Hot Melt Adhesive) has a mature ratio of back adhesive and side adhesive for book and magazine binding. When customers change the thread, they can adjust the melt adhesive temperature (usually 150-170 ℃) according to the thickness of the book and the machine speed to ensure stable shipment.
Q1: Can we use lockwire instead of glue and completely avoid using hot melt adhesive?
No. Lockthread only solves the connection of the inner text. Without glue applied to the book back, the finished product will become loose and the spine will have no stiffness, making it impossible to form a book.
Q2: Is it a glue problem with the missing pages of the lock book?
Most likely not. When a page falls off in a lockstitch book, first check the distance between the lockstitch needles and whether the book cover is loose. Adhesive only affects the smoothness of the book back and the fit of the cover.
Q3: Can lockwire and wireless share the same adhesive particle?
Universal book and magazine adhesive particles can be shared, but it is recommended to use a separate high initial adhesion model for the fine binding lock thread, as the sealing ring liner is more stable.
What are the uses of filter gel? An air filter is a component used to purify the air. Filters are generally used in farms, laboratories, sterile rooms, car engines, car air conditioners, household air conditioners, household air purifiers, etc. 1、 Hot melt adhesive for flat filter The commonly used filter cartridge adhesive is the high-efficiency […]
Hot melt adhesive needs to be heated by a hot melt adhesive machine before it can be used. The launch of this machine meets the needs of automated production of paper bags. For paper materials with different surface treatments, the performance of hot melt adhesive can be adjusted as needed. This allows for a variety […]
What are the hot melt adhesives for filters? An air filter is a component used to purify the air. Filters are generally used in farms, laboratories, sterile rooms, car engines, car air conditioners, household air conditioners, household air purifiers, etc. 1、 Hot melt adhesive for flat filter The commonly used filter element is a high-efficiency […]
Can PUR and EVA be mixed? Some manufacturers want to save time by using the same glue pot alternately for PUR and EVA adhesives, or by “mixing and complementing each other’s strengths and weaknesses”. These three misconceptions not only fail to increase efficiency, but also cause equipment damage and adhesive failure. Misconception 1: “Two types […]
