新闻中心
The hot melt adhesive particles used for sealing can be initially cured in only 3-8 seconds from coating to reaching transportable strength, and fully cooled and set in about 20-30 seconds. Compared to water-based adhesive, it takes a few minutes to wait, which is why hot melt adhesive is irreplaceable on high-speed sealing lines. Below, use a checklist to clarify the key points at once.
| Scene | Initial solidification time | Suggested adhesive type |
|---|---|---|
| Automatic sealing of e-commerce small items | 2-4 seconds | Quick fix sealing box particles |
| Heavy duty corrugated stacking box | 5-8 seconds | High initial viscosity particles |
| Handmade framing of gift box heaven and earth cover | 8-15 seconds | Medium temperature universal particles |
Q: Does fast curing mean it sticks firmly?
Answer: Not necessarily. Fast initial solidification is beneficial for the production line rhythm, and the final fastness depends on the penetration and cohesive strength. Sunlife hot melt adhesive’s sealing particles balance both.
Q: Why does it solidify faster in summer and slower in winter?
Answer: Low temperature substrates absorb more heat, and the adhesive layer dissipates heat quickly but lacks penetration, resulting in “false solidification”, which requires insulation or fine adjustment of the adhesive temperature.
Q: Can it be re pressed and re bonded after curing?
Answer: The cooling of hot melt adhesive is irreversible, and when opened, it needs to be reheated and coated again. It cannot be repeatedly applied like tape.
Guangzhou Sunlife Trading can recommend Sunlife hot melt adhesive particles with corresponding curing speed according to your sealing cycle, and provide small samples for machine testing.
Matching principle in one sentence:The faster the machine speed, the faster the required curing and the shorter the opening time; If the machine speed is slow or the workpiece is large and needs to be aligned over a long distance, it should be fixed and opened slowly insteadChoosing the wrong direction is either due to […]
Book bindingHot melt adhesive granulesHow often do you change it? There are two levels of “replacement” here: one is whether the material in the glue tank should be regularly cleaned and replaced, and the other is whether to change the model between different book types. Making a clear maintenance checklist can reduce a lot of […]
Implementing safety protocols and following best practices for workplace safety is crucial for the success of businesses, the safety of workers, and continuing to promote safer working conditions in order to prevent workplace injuries. Hot melt adhesive also poses other hazards to the workplace and requires special care to handle safely. The Development of Safety […]
Conclusion first: Try not to mix the same batch number across seasons as much as possible Hot melt adhesive granulesThe performance fluctuates significantly with temperature. High temperature and humidity in summer, low temperature and dryness in winter, using the same adhesive can easily lead to “summer rebound and winter cracking”. It is recommended to switch […]
