新闻中心
This is a completely normal physical phenomenon. Hot melt adhesive particles are thermoplastic materials with a fixed softening point (usually between 70 ℃ -110 ℃). When the temperature in the warehouse is high and close to the softening point, the particles will soften or even slightly clump; In winter, it becomes hard and brittle at low temperatures, and can be easily pinched by hand. As long as it does not melt or carbonize, it does not affect its use.

If the particles become sticky, oily, and agglomerate at room temperature (around 25 ℃), it indicates a low softening point or the addition of low melting point recycled materials. This type of material is prone to pipe blockage and cannot stick firmly on the machine, and should be stopped. The softening point of Sunlife hot melt adhesive particles is clearly marked, and the inventory at room temperature is stable. It is not soft in summer and not powdery in winter.
Q: Will pouring hard particles directly into the glue tank in winter damage the machine?
Answer: No, it will return to flow after melting; But for large clumps, it is recommended to crush them first to avoid getting stuck and stirring.
Q: Can we set a uniform temperature for the air-conditioned room?
Answer: Yes, constant temperature inventory is ideal as it can reduce seasonal performance fluctuations.
Q: Should the temperature of the glue tank be lowered in summer?
Answer: The temperature of the environment can be lowered by about 5 ℃, but it is important to ensure fluidity and not lower than the recommended lower limit.
Sunlife Hot Melt Adhesive from Guangzhou Sunlife Trading provides seasonal storage suggestion cards to help the production line minimize seasonal fluctuations.
#How to deal with hot melt adhesive in printing waste paper? The relationship between hot melt adhesive and paper recycling and ink removal After printing books, brochures, and paper boxes, there are always waste paper such as cut edges, discarded pages, and box scraps. Nowadays, most printing factories recycle waste paper and then make paper, […]
The characteristics of EVA hot melt adhesive: Hot melt adhesive is a solid, fusible polymer that does not require solvents and contains no 100% moisture. It is solid at room temperature and turns into fluid and viscous liquid when heated to a certain temperature. Melted EVA hot melt adhesive is light brown or white. EVA […]
Direct answer:Hot melt adhesive pelletsThe most direct consequence of high moisture content is the formation of bubbles, intermittent glue lines, and decreased bonding strength during the melting process. In severe cases, the glue layer may turn white and the spine may become hollow. EVA rubber particles themselves do not have strong moisture absorption, but after […]