新闻中心
Why does pearl cotton hot melt adhesive have wire drawing? During the process of gluing pearl cotton with a drum hot melt glue machine, some customers may find that the hot melt glue has a wire drawing phenomenon. The wire drawing of the hot melt glue not only affects the construction efficiency, but also affects the appearance of the product, and may even affect the bonding effect. So how to solve the problem of hot melt adhesive wire drawing?
Possible reason 1: The temperature of the glue tank in the drum hot melt glue machine is too low
Reason and solution: Low temperature will increase the viscosity of hot melt adhesive, that is, the thinner it is, the easier it is to draw. The melting temperature of the hot melt adhesive machine can be appropriately increased to reduce the viscosity of the hot melt adhesive. It should be noted that the temperature of the hot melt adhesive machine should not be raised too high to avoid carbonization of the hot melt adhesive.
Possible reason 2: The glue is too thick
Reason and solution: The thicker the pearl cotton hot melt adhesive, the easier it is to draw. If the thickness of the adhesive is thin, the speed can be increased, and the higher the speed, the less adhesive is needed. You can also adjust the thickness knob to look thinner. Or adjust the pressing height during the gluing process, not too low or too low. The easier it is to draw.
Possible reason 3: The viscosity of pearl cotton hot melt adhesive is too high
Reason and solution: The higher the viscosity, the easier it is to draw. Replace low viscosity hot melt adhesive particles or replace special formula non brushed hot melt adhesive particles
Ordinary hot melt adhesive will draw, but the difference is obvious. When encountering wire drawing problems, there is no need to be nervous. Sunlife Hot Melt Adhesive has been dedicated to the research and production of hot melt adhesives for over a decade. We are dedicated to providing our customers with high-quality products and excellent value services.
Why can’t EVA hot melt adhesive stick? Hot melt adhesive is a widely used adhesive in industrial production processes, but there may be inevitable non stick situations during application. So what are the reasons that affect the viscosity of hot melt adhesive? It is mainly divided into the following three categories: 1 EVA hot melt […]
First of all, the conclusion is that the powder on gold and silver cardboards is mostly due to “surface coating not being treated properly” or “glue temperature not being pressed down” Gold and silver cardstock is coated with a layer of gold and silver foil or PET aluminum plated film on the surface of the […]
Under standardized storage, the shelf life of EVA hot melt adhesive granules is usually 12-24 months; Polyolefin and other systems can last longer. But ‘shelf life’ does not mean ‘just leave it at will’, the environment determines the actual usable time. Key factors affecting shelf life Reference for shelf life of different systems system Reference […]
Direct answer: The reason for the broken glue when flipping pages in the adhesive book is that the glue layer has not penetrated into the back of the book and the glue layer is brittle. The solution needs to start from four aspects – milling and slotting should be in place, the temperature and amount […]
