新闻中心
Using hot melt adhesive particles on the same material surface will provide better quality assurance, as hot melt adhesive is always sprayed on the material surface in a molten state – this helps to generate thermal reactions and increases adhesion compared to adhesives, without using heat during the bonding process. Stable quality provides good adhesion and also helps limit the risk of adhesive, which helps the machine run smoothly.
With the advantage of restoring the solid state after bonding, hot melt adhesive particles ensure that the product can be stored or used in areas with harsh weather conditions (too cold or too hot, high humidity…).
Improve productivity
Hot melt adhesive can be applied to manual and high-speed automatic production lines. This allows manufacturers to use the entire modern industrial equipment production line, which helps to quickly increase productivity and significantly improve profitability.
Convenient, easy to use and store
Hot melt adhesive comes in many different shapes: granular, rod-shaped, box shaped, pillow shaped, and block shaped.
Unlike solvent based or water-based adhesives Hot melt adhesive particles are usually solid, free of volatile organic compounds, and not affected by humidity. This facilitates storage or transportation, greatly saving production and labor costs.
Shorten and limit machine downtime
The downtime of equipment has always been a concern for the production department. Inappropriate glue can take a long time to clean, maintain, and troubleshoot due to unstable quality, resulting in significant losses in production efficiency.
Moreover, prolonged downtime can shorten the service life of equipment and cause significant losses to long-term economic benefits. Therefore, if your production line is currently experiencing glue problems and cannot find a solution, then considering using Sunlife hot melt adhesive to produce hot melt adhesive granules is your best solution.
Reduce costs and increase profits
As mentioned above, production is a process of improving and reducing costs, but still ensuring quality. The long-term benefits you can gain from using hot melt adhesive are cost stability, significant reduction in mechanical repair and maintenance costs, extended equipment lifespan, and reduced storage costs.
The opening time and solidification time are important specifications for selecting suitable EVA hot melt adhesive for specific applications. Choosing adhesive that meets the specifications will be one of the factors in achieving the required adhesive force. Opening time:Defined as the time it takes to apply adhesive to the surface of a material until it […]
As a common packaging material, cardboard boxes play an important role in logistics and transportation. The reason why cardboard boxes can carry and protect items is largely attributed to the bonding effect of packaging hot melt adhesive. This article will explore the bonding effect of packaging hot melt adhesive from the following aspects: the basic […]
The acceptance of pearl cotton hot melt adhesive should not only focus on whether it sticks when just pressed. For the processing of cushioning packaging, lining, and combination packaging, appearance, positioning, and adhesive performance after cooling are equally important as batch operation stability. This article provides a practical on-site judgment method. Core KeywordsPearl cotton adhesive, […]
What are the difficulties in bonding velvet fabrics? The surface of velvet (corduroy, velvet, short hair velvet, etc.) is covered with fine fluff,hot melt adhesive pelletsAfter coating, it is easy to penetrate into the gaps of the fluff instead of sticking to the base fabric, resulting in low initial adhesion and easy detachment upon light […]
