新闻中心
Bookbinding is a problem that every reader needs to face, and hot melt adhesive is a widely used binding method nowadays. This method has more advantages and disadvantages compared to traditional staples and glue binding. Next, let’s explore in detail.
Advantages
Hot melt adhesive is a very strong glue, so bound books are very sturdy. Compared to traditional glue packaging, hot melt adhesive can better fix the pages of books and is less likely to cause them to fall off. In addition, books bound with hot melt adhesive can be opened and closed freely, without being as stiff as nails. Therefore, books bound with hot melt adhesive are not only more aesthetically pleasing, but also more practical.
Disadvantages
One disadvantage of hot melt adhesive is its hardness. Some people believe that books bound with hot melt adhesive are harder and not soft enough, and readers may feel uncomfortable while reading. In addition, hot melt adhesive also has a certain odor, which may affect the reading experience of readers. Finally, if the pages need to be replaced or repaired, books bound with hot melt adhesive are more difficult to disassemble.
Application
Hot melt adhesive has a wide range of applications in the field of binding. In addition to bookbinding, hot melt adhesive can also be used for binding printed materials, greeting cards, etc. In homes and offices, people can also use hot melt adhesive to make DIY crafts. Hot melt adhesive can bond various materials, including paper, wood, fabric, etc.
Conclusion
Overall, hot melt adhesive is a very practical binding method. It can make books more sturdy, aesthetically pleasing, and less prone to problems such as falling pages. However, the hardness and odor of hot melt adhesive are also issues that need attention. When using hot melt adhesive, we should choose whether to use it to bind books based on the actual situation.
Hot melt adhesive granulesWhat is the typical melting point? There is no unified “melting point” for hot melt adhesive particles, which are more commonly used in the industrysoftening pointandRecommended temperature for useTo describe. The softening point of common EVA hot melt adhesive particles is about 70 ℃ -110 ℃, while the actual coating (gluing) temperature […]
EVA eco-friendly hot melt adhesive is a thermoplastic material composed of EVA, tackifiers such as petroleum and rosin, as well as some bonding AIDS, and is formed in solid cylindrical rods or granular form. It can be melted and applied by using a hot melt gun, sprayer or other glue binding equipment, etc. Because it […]
Hot melt adhesive is a type of thermoplastic that melts into a solid state by heating and applying temperature. When the adhesive begins to solidify (heat loss) before the material is bonded, cold bonding occurs, which can lead to bonding failure. Usually, it appears to be firmly adhered after bonding, but the bonding strength may […]
What are the applications, uses, and advantages of hot melt adhesive? Hot melt adhesive is widely used in various industries. Here are some of the main industries that benefit from hot melt additives. Electronics:Electronic innovation affects almost every field of our lives.. The formula currently under development helps promote electrical interconnection, provide critical protection, and […]
