新闻中心
Direct answer:Hot melt adhesive particles belong to thermoplastic materials and can theoretically be melted repeatedly, but in most cases, “recycling and reuse” on the production site is not cost-effective or safe.There is only one situation that can be recycled – clean residue that has never been used on the machine and has not been contaminated; Residual glue that has been heated for a long time in the melt glue pot or mixed with paper scraps and dust will significantly deteriorate in performance after remelting, and the risk is far greater than the material cost saved.
Thermoplasticity only indicates that it can repeatedly soften, and does not mean that the molecular structure is not affected. Every high-temperature melting will cause oxidation of some of the thickening resin and breakage of some polymer chains, resulting in yellowing of color, decrease in viscosity, and attenuation of initial adhesion. In actual testing, after the same batch of adhesive is repeatedly melted three times at 180 ℃, the viscosity often decreases by more than 15%, and the adhesive fastness decreases accordingly.
The residue at the bottom of the pot is the least recyclable part. It has undergone the longest period of heating and is usually carbonized. When it is removed and remelted, it will bring in black slag, directly causing nozzle blockage, black spots on the glue line, and even contaminating the entire batch of book cores. The correct approach is to regularly clean the pot with specialized cleaning agents and dispose of residual glue as solid waste.
The scraps cut from the adhesive book carry paper fibers, ink, and dust. After remelting, these impurities will not disappear, but will only become suspended solids in the glue pot. Light cases can block the nozzle, while heavy cases can create stress concentration points in the adhesive layer, causing the spine to crack prematurely when folded.
The softening point of different batches of the same model is allowed to have a normal fluctuation of ± 2-3 ℃. It is not a problem to use it alone, but mixing it together will make the melting curve unpredictable and the adjustment parameters difficult to stabilize. If it is indeed necessary to merge, it is necessary to conduct sample verification on the same device first.
Calculating an account is more intuitive:
| project | Recycling and reusing | Standardized disposal |
|---|---|---|
| Material savings | Save about tens of kilograms of glue per month | 0 |
| Spray nozzle cleaning frequency | Significantly increase | Normal |
| Waste risk | High risk of batch repair | low |
| Downtime Loss | The cost of shutting down the nozzle far exceeds the saved glue fee | controllable |
For a glue binding line that produces tens of thousands of copies per day, one shutdown and repair caused by black residue blockage is enough to offset half a year of “recycling revenue”.
The more fundamental way to save money isReduce the generation of surplus materialsAdd glue in small batches according to the shift usage, control the amount of glue in the pot to the lowest before leaving work, and use up one bag before opening a new one. When Guangzhou Sunlife Trading calculates the usage for customers, they usually provide recommendations for the glue adding rhythm. Sunlife’s hot melt adhesive series also offer various packaging specifications for easy access according to needs.
Q: Which is better, overnight insulation or reheating of the glue pot the next day?
Answer: Re heating is better. Long term insulation is equivalent to continuous thermal aging, and overnight insulation glue often turns yellow and viscosity decreases the next day. Unless the device has a low-temperature standby function, it is recommended to turn off the power after work.
Q: How to do first piece confirmation for recycling glue mixed with new glue?
Answer: Observe whether the glue line is continuous and whether the color is abnormal, then conduct a hand tear fiber damage test to confirm that the fiber damage rate is consistent with pure new glue before continuing production.
Everything in the world has two sides. For environmentally friendly hot melt adhesive manufacturers involved in the adhesive industry, our accumulated industry and production experience deeply understand that hot melt adhesive particles, like anything else, not only have many unique advantages, but also inherent disadvantages. Undoubtedly, we want to understand the advantages of hot melt […]
The correct sequence for carbonization of residual glue in the glue can is:First, cool down to the softening range where the glue can still flow (about 120-140); Drain the remaining adhesive (℃), then use specialized cleaning adhesive or high flash point cleaning agent to circulate and soften the carbon residue, and finally use a copper […]
The occurrence of wire drawing, back cracking, page dropping, or edge glue overflow in book and magazine binding lines may not necessarily be due to “insufficient glue”. The paper coating, glue temperature, glue amount, milling back quality, and finished product cooling time will all jointly affect the results. This article provides a feasible troubleshooting sequence […]
The packaging industry is rapidly changing with fluctuations in demand from various industries. However, nearly 80 years after the invention of the first adhesive product designed to address temperature and humidity challenges, a fact still exists – all types of industries rely on hot melt adhesives. At the time of its invention, this multifunctional adhesive […]
