新闻中心
Choose hot melt adhesive granules and focus on 7 key parameters: softening point, melt viscosity, opening time, curing time, initial adhesion, temperature resistance range, color and appearance. This article compiles the meanings, common ranges, and selection points of each parameter into a table, which can be directly compared and used by procurement and technology.
| parameter | Common intervals | Key selection points |
|---|---|---|
| softening point | 75-110℃ | Determine heat resistance, it is recommended for summer warehousing logistics to be above 85 ℃ |
| Melt viscosity | 1000-8000mPa·s(180℃) | Choose low viscosity and good flow for high-speed lines, and high viscosity for thick adhesive layers |
| Opening hours | 5-60 seconds | Match the rhythm of the equipment, the glue binding line should be short and the mounting should be long |
| curing time | 2-15 seconds | Determine the length of the pressing station, fast line with fast curing |
| Initial tack | Measured by peel strength | Sealing and pasting boxes require high initial adhesion and anti rebound |
| Temperature resistance range | -From 20 ℃ to 70 ℃ | Select based on extreme temperature during storage and transportation |
| Color Appearance | Water white/light yellow/yellow | Books and periodicals should be selected with white water that does not penetrate the bottom, and light yellow can be used for sealing |
Q: Where can I get the parameter table?
Regular manufacturers have technical parameter tables for each model, and Sunlife hot melt adhesive can provide TDS with samples, including recommended construction temperature and all key parameters.
Q: How to choose between two models with similar parameters?
Prioritize choosing the one with better actual testing results compared to your own materials. Guangzhou Sunlife Trading supports sending materials for testing, speaking with data.
Stick this table next to the procurement station and check the parameters item by item. The probability of selecting the wrong adhesive particles will be significantly reduced.
The application methods of EVA hot melt adhesive and the variables to be considered: Due to the multi-functionality of a series of markets, the global hot melt adhesive market is growing. Before choosing hot melt adhesive for the process, please carefully review the type of application method and the variables to consider: EVA hot melt […]
Sustainable hot melt adhesives for handbag manufacturing are increasingly needed by consumers and businesses for products that can meet environmental requirements while still achieving their core purposes. Handbags are no exception. Trends show a clear shift from plastic to paper, and some countries have completely banned the use of plastic bags. The < figure class="wp […]
hot melt adhesive cost If you wish to switch to hot melt adhesive to meet the application requirements of your enterprise, then you are on the right track to reduce packaging costs. However, if you are currently using outdated manual adhesive alternatives for your business, such as tape or staples, then leveraging a hot-melt system […]
Hot melt adhesive is a type of plastic adhesive. Its physical state changes with temperature within a certain temperature range, while its chemical properties remain unchanged. It is non-toxic and odorless, and is an environmentally friendly chemical product. Hot melt adhesive is melted by heating. The molten adhesive turns into a liquid and is then […]
