新闻中心
Direct answer: The consumption of adhesive particles is relatively high, and 90% of the problem lies in four areas – excessive setting of adhesive amount, waste caused by improper temperature, equipment leakage, and mismatched selection of adhesive particles. After item by item investigation, most factories can reduce unit adhesive consumption by 15% -30% without sacrificing bonding quality.
| measures | Typical consumption reduction range |
|---|---|
| Adjust the glue volume back to the standard value | 10%-20% |
| Temperature standardization | 3%-8% |
| Block the leakage and dripping | 2%-5% |
| Selection optimization | 5%-10% |
Q: Is it more cost-effective to switch to cheaper rubber granules?
Not necessarily. Low price adhesive has low content, high consumption, and requires a lot of rework, resulting in higher overall costs. Therefore, it should be compared based on the “cost of adhesive per unit product” rather than the “unit price per kilogram”.
Q: How do you know if your factory’s glue consumption is normal?
Record the weekly production and glue usage, calculate the glue consumption per book/box, and then compare it with industry reference values. Guangzhou Sunlife Trading can provide customers with free rubber consumption accounting and on-site diagnosis.
Summary: Reducing glue consumption does not rely on saving money, but on standardizing the glue quantity, temperature, equipment, and selection. The technical team of Sunlife hot melt adhesive can assist in implementing each item step by step.
High temperature resistant hot melt adhesive for books and magazines is mainly based on polyamide resin, so high temperature resistant hot melt adhesive is also known as polyamide hot melt adhesive. Polyamide resin is a linear thermoplastic resin with a large number of repeated amide groups on the molecular main chain. Compared with other thermoplastic […]
What creates high-performance book and magazine edge glue? When dealing with difficult paper, medium to medium curing adhesives can provide better adhesive penetration between pages and on the cover. When the paper quality is easier to adhere, fast curing products are usually used in high-speed magazine production lines. The viscosity of the adhesive you choose […]
Direct answer: The back adhesive layer of wireless adhesive packaging for books and periodicals is usually controlled at 0.6-1.0mm, and the side adhesive is 0.2-0.4mm; the thickness of the adhesive dots/lines for corrugated cardboard box sealing is generally 0.3-0.8mm; the thinnest layer for color box pasting is 0.15-0.3mm.The thickness is not necessarily better, sufficient, uniform, […]
Hot melt adhesive particles are solid adhesives that are heated above their melting point before being applied to a substrate. According to the desired application, hot melt adhesive has various appearances and textures. They do not require a curing or drying period as they quickly solidify when cooled to the freezing point. Therefore, hot melt […]
