新闻中心

News centres

How to determine the amount of hot melt adhesive particles for book and magazine rotation adhesive binding line? A production line renovation case

2026-08-14    Views: 1    Chinese

Answer directly

The amount of glue applied to the rotary glue binding line is not necessarily better, but rather to create a uniform and permeable adhesive layer on the spine of the book. We followed up on a weekly report requesting online renovation, which reduced the page drop rate by adjusting the amount of glue and temperature.

森莱热熔胶默认封面

Case Background

A certain printing factory’s weekly report requested high-speed operation of the printing line, which resulted in excessive glue loading, excessive glue overflow, slow cooling, and uneven book backs. Guangzhou Sunlife’s commercial technicians arrived on site and switched to Sunlife with better liquidityhot melt adhesiveHot melt adhesive granulesAnd lower the pressure of the glue roller.

Transformation action

  • The amount of glue applied has been reduced from 0.8 grams per bottle to 0.55 grams per bottle, resulting in a decrease in glue overflow.
  • Adjust the melt adhesive temperature according to the type of paper to achieve more uniform penetration.
  • Add a pre opening section to allow the adhesive to form a suitable opening time before compression.

Result

The page drop rate has decreased from about 3% to within 0.5%, while the binding speed has increased and the cost of consumables has decreased.

Frequently Asked Questions

Q: How to measure the amount of glue applied?Calculate the difference between the blank book block and the adhesive pack, and convert it to the amount used per book.

Q: Do different types of paper need to have varying amounts of glue applied?Yes, add an appropriate amount of paper with strong adhesive absorption.

Popular Articles

Phone Message