新闻中心
The two things that are most feared in bid binding are flipping pages and opening glue, and cracking the spine of the book. The solution is to chooseGood flexibility, opening time 6-10; s、 Softening point 85; Up and down in ℃ofHot melt adhesive granulesCooperate with moderate back milling and sufficient clamping time. The bidding documents are mostly 80%; G double adhesive paper with colored separators, uneven paper thickness and large surface differences, relying on; Apply more glue&# 8221; It can’t be suppressed.

A bidding document is a dynamic that requires extensive and detailed reading, and page loss is rarely a single reason. The three common causes are:
The following table shows common reference values for tender documents, which need to be calculated based on paper, page count, and equipmentFirst, make a sample to confirm:
| project | Common problem values | Suggested reference value |
|---|---|---|
| Adhesive type | General low-priced version | Flexible books and periodicals |
| Operating temperature | Low (easy to penetrate) | Recommended by adhesive type, usually 165-175; ℃ |
| Milling depth | < 0.8 mm | 0.8–1.2 mm |
| Glue thickness | Thick and uneven | About 0.4-0.6; mm, Uniform on top |
| Clamping time | Compressed for rush work | Leave enough time for shaping without compression |
For scenarios such as quick printing of graphics and text, and binding of bidding documents with “multiple varieties, multiple papers, and tight delivery times”, it is recommended to keep a well adapted one on handSpecialized adhesive for graphic and text storesWhen encountering mixed paper, make a sample first and then measure it.
Q: The number of pages in the bid is not many. Can we use staples and seals?
Answer: Some bidding documents explicitly require that the adhesive cannot be disassembled or replaced, and it is necessary to read the binding terms of the bidding documents before bidding.
Q: Is it better to mill deeper back?
Answer: No. Too deep will weaken the paper connection strength, usually 0.8-1.2; Mm is sufficient, fine tune according to the paper and page number.
Guangzhou Sunlife Trading provides small package sizes of Sunlife hot melt adhesive for graphic and text fast printing stores. It supports sampling before placing an order and can provide recommended process parameters for different types of products such as bidding documents, brochures, and manuals.
The correct sequence for carbonization of residual glue in the glue can is:First, cool down to the softening range where the glue can still flow (about 120-140); Drain the remaining adhesive (℃), then use specialized cleaning adhesive or high flash point cleaning agent to circulate and soften the carbon residue, and finally use a copper […]
Answer directly Hot melt adhesive granulesIn winter, it becomes brittle and prone to breakage when used on machines, usually not because the glue is “broken”, but because the hardness and brittleness of the glue particles increase at low temperatures, the humidity in the workshop is low, or the glue particles are damp and repeatedly frozen […]
plum rain seasonHot melt adhesive granulesAgglomeration, mostly not due to glue spoilage, but ratherMoisture absorption+temperature fluctuationCausing mutual adhesion between particle surfaces. The principle of handling is simple: mild adhesion can be spread out and left to air, and after being dispersed, it can be used as usual; If there is obvious moisture absorption, whitening or […]
EVA hot melt adhesive, which is brittle in winter and prone to cracking in summer, belongs to the normal characteristics of thermoplastic materials and is not a product quality issue. It is strongly recommended to prioritize adjusting equipment temperature and production processes, and replace seasonal adhesive when the environment is extreme. At the same time, […]