新闻中心
Legitimate hot melt adhesive particles themselves are thermoplastic polymers that are solid, non-volatile, and insoluble in water at room temperature, making them relatively safe adhesive materials. Whether it is “toxic” mainly depends on the formula and high-temperature usage method.
| focus | Explanation |
|---|---|
| recyclability | Pure EVA hot melt adhesive belongs to thermoplastic and can theoretically undergo further hot melt treatment |
| Residual odor | After cooling, the odor is sealed, and there is almost no sensation when it comes to books/boxes |
| Inspection Report | Choose a manufacturer that can provide RoHS and VOC data |
Q: Can hot melt adhesive particles come into contact with food packaging?
Answer: It is necessary to choose a food grade formula and provide contact safety testing. Sunlife hot melt adhesive can provide corresponding reports according to its use.
Q: Does having a smell equate to being toxic?
Answer: Not necessarily, but a pungent smell usually means there are more volatile substances. It is recommended to replace it with qualified materials.
Q: How can the workshop reduce risks?
Answer: Temperature control should not exceed the upper limit, ventilation should be maintained, and low odor new material particles should be selected.
Sunlife hot melt adhesive from Guangzhou Sunlife Trading can provide environmental and food contact testing reports, making procurement more reassuring.
For a long time, assembly lines have been the most effective way to mass-produce almost all products. Of course, product assembly has been constantly improving. In recent decades, hot melt adhesives have become an indispensable part of the assembly process. Here are several ways in which hot melt adhesive is crucial to the success of […]
Conclusion I need it. Taken from a cold storage or low-temperature environmentHot melt adhesive granules，It must be warmed up to room temperature in the workshop before openingOtherwise, if the outside of the bag is cold and the air is hot, water vapor will condense on the surface of the particles, causing bubbles, white spots, and […]
What do we need to inspect when replacing the adhesive particles for book and magazine packaging and making samples? Directly provide the list: When changing the glue or selecting a new supplier, a sample must be made and checked before formal productionAdhesive strength, page flipping flatness, appearance of book back, temperature resistance, opening time, odor, […]
It was recently learned that Henkel General Industries’ Manufacturing and Maintenance business Unit will increase product prices starting from June 30, 2024. For new orders and existing orders after June 30, the adjusted new prices will be applied. Henkel’s reason for adjusting the product prices this time is that due to the continuous impact of […]
