新闻中心
Book and magazine adhesive packaging is not a universal use of particles. It is important to choose the appropriate model based on the paper type, thickness, and machine type. Below is a list of common models.
| Book type | Recommended Model | Coating temperature |
|---|---|---|
| Ordinary adhesive book | Universal EVA | 160–170℃ |
| Copperplate paper brochure | High viscosity EVA | 175–180℃ |
| High speed thin paper | Low temperature fast solidification | 150–160℃ |
Q: Can a single particle accommodate all books?
Answer: Difficult. It is recommended to stock different types of mixed paper.
Q: What would happen if the model is wrong?
Answer: Thin paper should use high viscosity and easy to pass adhesive, while thick paper should use universal and easy to peel pages.
Q: How to quickly determine the model?
Answer: Give the paper sample to the manufacturer, and Sunlife hot melt adhesive will match the model according to the paper type and provide the process card.
Guangzhou Sunlife Trading can provide a set of Sunlife hot melt adhesive model list according to your usual book type, so as to stock up without any pitfalls.
Packaging hot melt adhesiveFor packaging, it is not unfamiliar, not only with high efficiency, but also with high cost-effectiveness. Hot melt adhesive is often used for packaging in cardboard boxes. Conventional slotted cardboard box (RSC)Use 1/8 inch beads approximately 1/2 inch from the edge of the flip cover to create durable cardboard boxes. In this […]
Answer directly The surface of laminated business cards is dense and has low polarity, making it easy to “fake stick” when directly glued. The key is to choose the right adhesive type, treat the surface well, control the temperature and pressure, in order to stick firmly. Operating Steps Choose adhesive:Used for adhesive film and PVCHot […]
Direct answer: It is recommended to control the milling depth of conventional wireless adhesive packaging at 1.0-1.5mm, with thin materials up to 0.8mm and thick materials or copperplate paper up to 2.0mm. If the milling is too shallow, the adhesive will only stick to the surface of the crease and will fall off when flipping […]
temperature change of hot melt adhesive hot melt adhesive is a thermoplastic material – or polymer – that usually becomes flexible at warm temperatures. On the contrary, during the cooling process, the hot melt adhesive solidifies and eventually forms a well-known long-lasting bond. Temperature and its variation patterns have a significant impact on the performance […]
