新闻中心
The liquid level of the adhesive pool on the book binding line and sealing line directly affects the stability of the adhesive: low liquid level → intermittent adhesive release, uneven adhesive layer; Excessive liquid level → overflow of glue, accelerated aging of glue solution. The three mainstream liquid level control methods each have their own advantages and disadvantages.
| way | Principle | Accuracy | Applicable adhesive type | Price | Maintain |
|---|---|---|---|---|---|
| Float ball type | Float ball triggers switch as liquid level rises and falls | ±10mm | EVA/APAO | low | Floating ball is prone to jamming and stagnation |
| Photoelectric type | Infrared/laser reflection detection of liquid level | ±3mm | all | middle | The lens needs to be anti fog |
| Weighing formula | Weigh the total weight of the glue tank and glue solution to calculate the liquid level | ±1mm | all | tall | Almost maintenance free |
Small graphic and text store (2L glue pot) → Floating ball type is sufficient, cheap and simple. Medium sized adhesive assembly line (5-10L) → The photoelectric type has the highest cost-effectiveness and meets the precision requirements. Large continuous production line → Weighing is the most stable, maintenance free, and has the highest accuracy. Sunlifehot melt adhesive pelletsIt can operate stably in all three liquid level control systems.
Q: What if the float gets stuck?
A: After stopping the machine, remove the floating ball to clean the carbides and check the flexibility of the shaft. It is recommended to check every 2 weeks, as more frequent checks are needed for particles with high carbide content.
Q: Is the photoelectric type accurate in high-temperature steam environment?
A: Steam above the glue pool will interfere with the photoelectric signal. It is recommended to install a blowing dust removal and anti fog device at the detection window, or choose a weighing scheme.
Sealed boxHot melt adhesive granulesWhat should I do if I block the rubber hose? The sealing line is most afraid of rubber hose blockage: the dispensing speed may fluctuate, and even flow may be interrupted, resulting in poor sealing of the box. There are two common reasons for pipe blockage – incorrect glue temperature and […]
The performance characteristics of hot melt adhesive for paper packaging: Hot melt adhesive is melted into liquid by a hot melt machine, and then sent to the surface of the carton through the throat and spray gun of the hot melt machine. After cooling, the hot melt adhesive is bonded. It can meet the requirements […]
Hot melt packaging had become mainstream in the 1960s. Hot melt adhesive is a commonly used method in the packaging industry. It is usually used for closing cartons, sealing and stabilizing pallets, etc. Overview of Hot Melt Adhesives in Packaging: In the 1960s, hot melt adhesives became common in packaging and processing applications. The main […]
