新闻中心
Determine whether the material used to make the box is the same as before, and whether the surface has been treated, such as copperplate paper, with completely different properties from the original one. The performance differences of hot melt adhesives for the same purpose in the market are not significant. It will be difficult to find suitable hot melt adhesive for cardboard boxes, and passive selection may increase production costs. If the bonding effect of the cardboard packaging is really poor, it is recommended to adjust the surface treatment process of the cardboard box.

Secondly, whether the temperature has changed significantly from the previous time, the external temperature will affect the curing speed of the hot melt adhesive. When the weather is cold, the curing speed will be shortened, and if the line speed cannot keep up, it will not stick firmly. There are several solutions:
Firstly, it is to improve the speed of the production line, so that the glue can complete the sealing operation with better adhesive performance; Secondly, increase the usage temperature of hot melt adhesive by 5-10 degrees Celsius to prolong the cooling time; 3. Replace the hot melt adhesive with one that dries less quickly in cold weather.Moreover, whether the quality of the cardboard box hot melt adhesive is consistent with before and how much the quality of the raw materials fluctuates have an impact on the quality of the hot melt adhesive products. If the manufacturer does not control it well, it will have a significant impact on performance. This is a matter of choosing a long-term cooperative hot melt adhesive supplier. It is important to choose a Sunlife hot melt adhesive manufacturer with research and development capabilities, rather than relying on a formula to constantly adjust the composition ratio. What happens in the application can fundamentally solve the problem.
Many customers consider the cost of purchasing glue, but not everyone considers the cost of using the wrong type of glue or whether you are using adhesive correctly. Glue is only a small part of a large-scale project, but if applied incorrectly, it may lead to production issues. Insufficient use of adhesive can lead to […]
The performance and effect of the hot melt adhesive used for producing hand-held paper bags of different materials vary depending on the model used. Choose the right one< strong> Suitable for hand-held paper bags used for expensive gift packaging. Generally, white cardboard is used as a material for making hand-held paper bags. For white cardboard […]
What are the difficulties in bonding velvet fabrics? The surface of velvet (corduroy, velvet, short hair velvet, etc.) is covered with fine fluff,hot melt adhesive pelletsAfter coating, it is easy to penetrate into the gaps of the fluff instead of sticking to the base fabric, resulting in low initial adhesion and easy detachment upon light […]
Direct answer: Most of them are due to insufficient heat penetration, not poor glue The first few books and cardboard boxes couldn’t stick firmly when turned on, but then it became normal – this is almostHot melt adhesive granulesThe most common phenomenon in use. The root cause is usually that the temperature displayed on the […]