新闻中心
The flowability of hot melt adhesive particles has an impact on the quality of glue and adhesive. Hot melt adhesive has poor fluidity and can also cause stretching problems or mismatch with mechanical efficiency.
1. Sol temperature;
Hot melt adhesive is very sensitive to temperature, and changes in temperature can alter the structure of the hot melt adhesive. After slowly heating to a certain temperature, the performance of the hot melt adhesive reaches its optimal state.
2、 Coordination between the performance and process of hot melt adhesive;
Hot melt adhesivehas broad application prospects.. In order to meet the requirements of the bonding process, the formula and properties of the hot melt adhesive particles used in different products must be adjusted to varying degrees. The fluidity of hot melt adhesive varies in different regions. The flowability is generally related to the permeability of hot melt adhesive particles
3、 The quantity of adhesive in hot melt adhesive;
The fluidity of hot melt adhesive is indeed affected by the adhesive. Colloidal viscosity is high and not easily melted.
4. There are many impurities in the glue furnace.
In order to cope with the frequent use of high-density glue, the glue furnace is a continuous sol. Over time, the residue in the furnace will increase, which not only reduces the melting efficiency, but also leads to excessive mixing of slag and newly melted rubber, affecting the flowability and performance of hot melt adhesive particles.
5、 The glue outlet is blocked.
When the glue flowing through the outlet channel is blocked, the channel is not unobstructed. A maintenance plan should be developed for hot melt adhesive equipment, and its components should be regularly maintained, repaired, and cleaned to eliminate obstacles in the use of hot melt adhesive.
Direct answer: When printing and packaging companies conduct environmental impact assessments or apply for pollutant discharge permits, it involveshot melt adhesiveThere are usually five types of particle information – product MSDS (Safety Data Sheet), component and solid content description, VOCs and non methane total hydrocarbons generation basis, annual dosage and process addition method description, supplier […]
How to solve the problem of EVA hot melt adhesive becoming brittle in winter and cracking in summer? Summer is coming soon, and many new factory owners may not have encountered this problem before. There are also some who have encountered similar problems, but they were solved by our factory arranging technical personnel to help […]
The root cause of UV ink printing surface not sticking to hot melt adhesive isThe surface energy of the cured UV ink layer is extremely low (usually below 34 dynes), and the adhesive cannot wet and spreadIt can only stop on the surface to form a “false adhesion”, and when subjected to a slight force, […]
Pearl cotton, also known as EPE, is a foamed polyethylene polymer. Pearl cotton has many advantages such as water and moisture resistance, shock resistance, sound insulation, thermal insulation, good plasticity, strong toughness, recycling, environmental protection, strong impact resistance, and good chemical resistance. Features: low density, good flexibility, high recovery rate; Better shock resistance than polystyrene […]
