新闻中心
Bookbinding is a problem that every reader needs to face, and hot melt adhesive is a widely used binding method nowadays. This method has more advantages and disadvantages compared to traditional staples and glue binding. Next, let’s explore in detail.
Advantages
Hot melt adhesive is a very strong glue, so bound books are very sturdy. Compared to traditional glue packaging, hot melt adhesive can better fix the pages of books and is less likely to cause them to fall off. In addition, books bound with hot melt adhesive can be opened and closed freely, without being as stiff as nails. Therefore, books bound with hot melt adhesive are not only more aesthetically pleasing, but also more practical.
Disadvantages
One disadvantage of hot melt adhesive is its hardness. Some people believe that books bound with hot melt adhesive are harder and not soft enough, and readers may feel uncomfortable while reading. In addition, hot melt adhesive also has a certain odor, which may affect the reading experience of readers. Finally, if the pages need to be replaced or repaired, books bound with hot melt adhesive are more difficult to disassemble.
Application
Hot melt adhesive has a wide range of applications in the field of binding. In addition to bookbinding, hot melt adhesive can also be used for binding printed materials, greeting cards, etc. In homes and offices, people can also use hot melt adhesive to make DIY crafts. Hot melt adhesive can bond various materials, including paper, wood, fabric, etc.
Conclusion
Overall, hot melt adhesive is a very practical binding method. It can make books more sturdy, aesthetically pleasing, and less prone to problems such as falling pages. However, the hardness and odor of hot melt adhesive are also issues that need attention. When using hot melt adhesive, we should choose whether to use it to bind books based on the actual situation.
Direct answer:Hot melt adhesive granulesAfter absorbing water, the machine may experience bubbling of the melt adhesive, white spots on the adhesive layer, and decreased adhesion. In severe cases, the entire pot of adhesive may be scrapped Hot melt adhesive particles are hydrophobic but porous particles that will slowly absorb moisture after prolonged exposure after opening. […]
How often is it appropriate to clean the glue pot? The cleaning cycle of the glue pot depends on the amount and type of glue used. General recommendation: Thoroughly clean every 2-3 months under continuous production conditions; Intermittent use (less than 3 days per week) can be extended to 4-6 months. But in the following […]
What are the carbides in the glue pot? Why is it necessary to clean up? hot melt adhesive pelletsHeating in the glue pot for a long time will cause the resin and thickening agent to slowly decompose, forming black carbides that deposit on the bottom of the pot and the wall of the rubber tube. […]
Direct answer: Most of them are due to insufficient heat penetration, not poor glue The first few books and cardboard boxes couldn’t stick firmly when turned on, but then it became normal – this is almostHot melt adhesive granulesThe most common phenomenon in use. The root cause is usually that the temperature displayed on the […]
