新闻中心
What is the packaging adhesive industry?
There are many types of adhesives in the packaging industry, and many different types are used according to the situation. To laminate adhesives for flexible packaging, or to use combinations of different materials such as printing layers, or just some examples of these different situations. If necessary, high-speed bonding applications can also be used.

Common applications used
Packaging hot melt adhesiveApplications commonly used by manufacturers include paper processing, film and foil processing, end of line bonding and container labeling, carton sealing and sealing, and laminating adhesives for flexible packaging..

Research and Trends
In the past few years, the adhesive market in the packaging industry has grown exponentially. In fact, in; 2016 Year to Year; 2021 During the year, the demand for adhesives almost doubled, among which; 2020 Year to Year; 2021 The largest increase during the year.
One of the reasons for this increase is the recyclability and biodegradability of flexible packaging. Over the years, the demand for flexible packaging has steadily increased, as this advantage is superior to different types of packaging.
Due to the increase in distribution routes related to e-commerce, e-commerce business has also helped the hot melt adhesive packaging industry. This has led to the addition of anti damage packaging to protect the products being transported.
The brewing industry requires water-based adhesives with anti condensation properties, which has also driven the development of the industry. Combining this with the increasing public awareness of the environment will result in an industry with more sustainable and biodegradable products than in the past.
There are many participants in the adhesive industry, but technical adhesives are one of the most reliable choices in this field.
Conclusion and Key Points
Due to the environmentally conscious public, the packaging hot melt adhesive industry has undergone significant changes in recent years. But this transformation is good because the demand for biodegradable and environmentally friendly packaging has greatly increased in the packaging hot melt adhesive industry.
Can different brands of granules be poured into the same glue pot? Direct answer:Not recommended. Different brands of rubber particle substrates and formula systems may not be compatible. Mixing them may result in reduced performance, while mixing them may cause the entire pot to become clogged and scrapped, or the nozzle to be blocked.Many factories […]
Handbags, as a packaging product, are widely used in the natural market, which is beneficial for the hot melt adhesive in the handbag market. There are many grades of handbags themselves, and the packaging displayed also varies. To know which hot melt adhesive is good for handbags, first you need to know the grade of […]
The correct sequence for carbonization of residual glue in the glue can is:First, cool down to the softening range where the glue can still flow (about 120-140); Drain the remaining adhesive (℃), then use specialized cleaning adhesive or high flash point cleaning agent to circulate and soften the carbon residue, and finally use a copper […]
The quality of book binding often depends not only on the equipment and paper, but also on the binding adhesive. If a book experiences problems such as page dropping, glue peeling, stiff spine, uneven flipping, and low-temperature brittleness, it is often related to the choice of binding glue, glue temperature, paper type, and process compatibility. […]