新闻中心
EVA hot melt adhesive is a type of plastic adhesive product. The physical state of hot melt adhesive changes with temperature within a certain temperature range, but its chemical properties remain unchanged. Hot melt adhesive is non-toxic and odorless. How much do you know about the six major ways of applying hot melt adhesive?

1. Spiral spray adhesive
This is a relatively common way of spraying glue. EVA hot melt adhesive is discharged from a nozzle with fine nozzle holes onto regular spiral filaments by external air pressure. Applying glue in this way can significantly reduce the amount of glue used per unit area.
2. Roller coating
The molten EVA hot melt adhesive is conveyed to the rotating adhesive tank. The gluing roller rotates inside the tank, and the molten hot melt adhesive on the gluing roller is evenly scraped with a scraper. The product comes into contact with the rotating adhesive roller and is evenly coated. This gluing method is mainly used for fabric coating lamination, sheet gluing, etc.
< h4 > < strong > 3. The flat die blade coating < / strong > < strong > < / strong > < / h4 >
This is a relatively common way of grasping. After passing through the heated throat, the molten hot melt adhesive is evenly distributed in the guiding channels of the mold, and then extruded from the mold lip with preset adhesive film thickness and width. Most industrial hot melt tapes and labels are bonded using the mold scraper process.
< h4 > < strong > 4. Foam coating < / strong > < strong > < / strong > < / h4 >
In some special application scenarios, to achieve buffering or shock absorption effects and reduce the amount of adhesive used, a dedicated foaming melt adhesive machine can be employed to mechanically mix nitrogen into the molten hot melt adhesive, thereby forming the inflation of EVA hot melt adhesive. Then the mechanically foamed hot melt adhesive is applied to the workpiece through a nozzle. Foam coating technology has been widely used in the assembly of automotive parts to replace traditional rubber gaskets.
5. Stripping the glue
Similar to dispensing, this process can be used when two substrates only need to be bonded in strips. Common applications include the edges of plastic boxes such as PET curtain boxes, wine bottle boxes, and cosmetic boxes.
6. Dispensing
When two objects only need to be partially joined, dispensing is a relatively economical and fast simple process. Dispensing is usually used for folding cartons or cardboard binding.
Direct answer: There are three main methods for testing the binding strength of books and periodicals – spine tension (page tension) test, repeated folding test, and drop and stacking test. If only one type is selected, publications should be given priority for page pull-out force testing; To cover real usage scenarios, the combination of tension […]
Hot melt adhesive particles for high-speed sealing of cardboard boxes are not necessarily better with higher tensile strength. The sealing fastness also depends on the wetting of the corrugated paper by the adhesive particles, the cooling speed of the adhesive dots, the spraying rhythm, and the pulling direction during transportation. Sunlife hot melt adhesive recommends […]
Why does bookmark ribbon pasting require high adhesive particles? The ribbon bookmark of hardcover books is usually 3-5mm wide and pasted on the top inner side of the spine, with a small area and concentrated force. Ribbon materials are mostly polyester or nylon fabrics, with a smooth and flexible surface, and the adhesive layer must […]
Hot melt adhesives are classified by their application purposes as follows: 1. Hot melt adhesive for construction In the construction industry, hot melt adhesives are mainly used in construction and decoration, such as cork plywood, laminated boards, plastic flooring, wallpaper, insulation, decorative boards and insulation of non-load-bearing components. The use of hot melt adhesives in […]