新闻中心
Application of filter element adhesive. Filters are also known as filter elements. Common filters are divided into two categories: air filters and oil filters. Air filters are mainly used to purify air. It is generally used in automobiles. According to their uses, they can be classified into air filters and air conditioning filters.

The main function of a car air filter is to purify the air inside the engine and prevent dust in the air from causing damage to the engine. Air filter = The filter through which external air enters the front of the engine = air grille.

The main function of a car air conditioning filter is to purify the air inside the vehicle. Air conditioning filter = Pollen filter = Filter before outdoor air enters the driver’s cabin air conditioning system = air conditioning grille.

According to appearance, they can be classified into high-efficiency filters with separators and high-efficiency filters without separators. Among them, the air filters used for partitions are made of aluminum strips, etc., and are relatively heavy. The partition is made of hot melt adhesive and is lightweight.

The oil filter is mainly used to block dust, metal particles, carbon deposits, fume particles, etc., and is mainly used to protect the engine. Generally, PA polyamide hot melt adhesive is mainly used. PA type hot melt adhesive features high-temperature resistance and oil resistance.
Filter element adhesives generally use EVA hot melt adhesive and PO polyolefin hot melt adhesive. This hot melt adhesive features rapid curing and is suitable for mass production, especially for high-efficiency filters without separators. This glue mainly serves to fold the lines of filter paper, fold the edges of filter paper, fix the mesh film, and fix the filter element frame, etc.
Round spine hardcoverhot melt adhesive pelletsSpecial requirements The spine of a round spine hardcover book is curved, and when opened, the book core bends along the curved surface. The adhesive layer needs to have good flexibility and resilience. Hard rubber particles have high adhesive strength but are prone to cracking when bent, while soft rubber […]
Direct answer: It’s not the same thing Hot melt adhesive granulesThe testing report often mentions “softening point”, but rarely includes “melting point”. The reason is simple: this type of adhesive is mostly an amorphous polymer blend system, without a clear melting point like crystals, only a gradually softening temperature range. The softening point is an […]
The terms “back glue” and “edge glue” are often heard in book and magazine packaging, but many people cannot distinguish whether it is the same glue with a different name or two completely different glues? Choosing the wrong one not only wastes money, but also directly leads to loose pages and cracked covers. Below, using […]
Direct answer: For adhesive PP woven bags, APAO or POE based ones should be preferredHot melt adhesive pelletsDo not use regular EVA. The reason is that PP belongs to low surface energy materials (about 30 mN/m), and the EVA adhesive layer is almost unable to effectively wet it. When it sticks on, it does not […]