新闻中心

Hot melt adhesives are classified by their application purposes as follows:
1. Hot melt adhesive for construction
In the construction industry, hot melt adhesives are mainly used in construction and decoration, such as cork plywood, laminated boards, plastic flooring, wallpaper, insulation, decorative boards and insulation of non-load-bearing components. The use of hot melt adhesives in buildings not only enhances construction quality, increases aesthetics and comfort, but also improves the construction process. At present, the largest hot melt adhesives used in construction mainly include polyvinyl acetate, polyacrylic resin and polyvinyl alcohol.
2. Hot melt adhesive for packaging
Packaging and printing, as the clothing of commodities, have become an important factor influencing the competitiveness of products. People’s demands are getting higher and higher. They require low cost, durability, good looks, to stimulate and attract consumers, and also anti-counterfeiting. Characteristics. Packaging hot melt adhesives are mainly composed of EVA, polyester, polyamide, polyalkylene, styrene block copolymer hot melt adhesives, etc. Among them, EVA hot melt adhesives are the largest. In addition, hot melt adhesives are also used. Pressure-sensitive adhesive.
3. Hot melt Adhesive for shoe-making
Hot melt adhesives have been used in the shoe-making industry for 40 years. The technology is mature, the applications are extensive, and the quantity and variety are constantly increasing. The basic requirements for hot melt adhesives used in shoes are: high initial strength, good durability, short curing time, good flexibility, resistance to bending, heat, oil, water, cold and chemical corrosion. The main types of hot melt adhesives used in shoe-making include ethylene-vinyl acetate copolymer, polyester, polyamide, polyethylene and polyurethane hot melt adhesives, among which the first three are used in larger quantities.
4. Textile Hot Melt Adhesive
Adhesives are an important component of textile auxiliaries. The purpose of using adhesives in the textile industry is to enhance the appearance quality and performance. At present, the commonly used hot melt adhesives in textile printing and dyeing include ethylene-vinyl acetate copolymer, polyamide, polyurethane, etc., as well as polyester, polyethylene, polypropylene and other hot melt adhesives. It is mainly used for garment bonding (including: inner seams, collars, cuffs, waist of skirts and trousers, core and fabric, zippers, patterns, etc.), carpet backing fabric, fabric flocking, and non-woven fabric manufacturing.
5. Hot melt adhesives for electronic and electrical appliances
The rapid development of the electronics industry has raised many new problems that need to be urgently solved for bonding technology, and has put forward increasingly higher requirements for the electrical insulation, temperature resistance, corrosion resistance, and resistance to wet heat aging of adhesives. Hot melt adhesives in the electronics industry feature high softening points, narrow melting ranges, high bonding strength, moderate viscosity, excellent electrical properties, good toughness and flame retardancy. The hot melt adhesives mainly used in the electronics industry are polyester, polyamide and other hot melt adhesives.
6. Automotive hot melt Adhesive
As an adhesive for automobiles, in addition to meeting the usage and service life requirements of automobiles, it must also be applied in such high-flow production processes and must possess appropriate physical and chemical properties as well as good construction performance. Hot melt adhesives have certain advantages in terms of storage stability and transportation safety. It is mainly used for bonding car roofs, interior and exterior car trim parts, etc., with polyester and polyamide hot melt adhesives as the main types.
7. Medical Hot melt Adhesive
Hot melt adhesives used in medical applications are mainly hot melt pressure-sensitive adhesives, which are used to cover wounds, fix detectors, drug delivery carriers, and adhere surgical zippers to the skin. This hot melt adhesive must have good adhesion to all kinds of skin. This glue is easy to remove, leaves no residue, does not harm the skin and does not irritate the skin.
What do we need to inspect when replacing the adhesive particles for book and magazine packaging and making samples? Directly provide the list: When changing the glue or selecting a new supplier, a sample must be made and checked before formal productionAdhesive strength, page flipping flatness, appearance of book back, temperature resistance, opening time, odor, […]
What causes white spots and bubbles in the adhesive layer? Directly provide the order of investigation:Moisture absorption of adhesive particles → high temperature of adhesive glue → stirring and rolling into air → surface moisture of substrate → suction of adhesive pumpAccording to this order, over 90% of the white spot bubble problems can be […]
In different industrial applications, procurement communication for tannin extract cannot be limited to product name and quantity. Clarifying the process location, matching materials, operating conditions, and acceptance methods can make sample testing and subsequent supply more targeted. This article provides a communication checklist for procurement and technical personnel. Core KeywordsProcurement of tannin extract, industrial tannin […]
What does the opening time of book and magazine adhesive packaging mean? Select books and magazinesHot melt adhesive granulesI often see a parameter:Open timeIt refers to the time window during which the adhesive can be pressed and bonded onto the spine of a book before losing its stickiness. The window is too short, and if […]