新闻中心
The commonly used EVA hot melt adhesive particles for book and magazine packaging, with the optimal coating (gluing) temperature generally between 160 ℃ and 180 ℃; The specific value depends on the melt viscosity formula of the particles. When the temperature is low, the flowability is poor and the fiber cannot penetrate, while when it is high, carbonization, strong odor, and adhesive strength decrease instead. Below are three typical types of particles compared together.

| Type | Recommended coating temperature | Opening hours | Applicable books and periodicals |
|---|---|---|---|
| General EVA adhesive particles | 160–170℃ | moderate | Ordinary adhesive bound books and exercise books |
| High viscosity EVA adhesive particles | 170–180℃ | longer | Copperplate paper brochure, thick book core |
| Low temperature fast curing adhesive particles | 150–160℃ | Short | Thin paper dictionary, high-speed line |
We tested both the universal and Sunlife hot melt adhesives with high viscosity on the same automatic glue assembly line: the universal adhesive had even spine pulling at 165 ℃; Sunlife’s high viscosity copperplate paper book core is more stable when pulled at 175 ℃, and there is no empty glue after passing through the cover machine. Both have a wider temperature control window than miscellaneous particles, making it less likely for beginners to overturn due to temperature fluctuations.
Q: What happens if the temperature is set too high?
Answer: When the temperature exceeds 190 ℃, the rubber material begins to carbonize, the color turns brown, the viscosity drops sharply, the spine of the book is easily brittle and cracked, and there is smoke and odor.
Q: Can different brands of granules be mixed and used at different temperatures?
Answer: Not recommended. Different formulas result in different optimal temperature windows, and mixing them can easily clog rubber hoses and cause unstable bonding.
Q: The workshop is cold in winter, should the temperature be raised?
Answer: It is possible to adjust the temperature by about 5 ℃ to compensate for heat dissipation, but priority should be given to insulation of the glue tank rather than simply heating it up.
Sunlife Hot Melt Adhesive from Guangzhou Sunlife Trading provides recommended process cards with each batch of goods, indicating the optimal coating temperature range for easy production line copying.
The use of hot melt adhesive for hand-held bags is becoming increasingly widespread. This type of bag has a high biodegradability and recyclability, which has led to an exponential increase in its popularity in various activity fields. Manufacturers have designed safety references for using hot melt adhesives for this purpose. There is no doubt that […]
Conclusion first:cannot replaceUsed for edge sealing of panel furnitureHot melt adhesive granulesIt is designed for “high temperature, thick adhesive layer, metal and edge banding bonding”, and book binding requires “low temperature fast penetration, thin adhesive layer, and paper fiber locking”. The most typical consequence of using edge banding glue to fix the book is that […]
hot melt adhesiveParticles must be usedControllable temperature electric heating equipmentThere are only four formal methods for melting: glue pot (glue box), glue gun/handheld glue applicator, glue machine heating pipeline, and pasting equipment with heating rollers.It is strictly prohibited to use open flames, induction cookers, microwaves, or hot water pots for heating——Uncontrolled temperature can cause the […]
Whose pot is the offset of the cover indentation line? Offset of crease lines on hardcover book covers is a common quality control issue, manifested as the bending of the cover not being in the design position, and in severe cases, causing the cover to warp and the spine to be uneven. Many people initially […]