新闻中心
Why does pearl cotton hot melt adhesive have wire drawing? During the process of gluing pearl cotton with a drum hot melt glue machine, some customers may find that the hot melt glue has a wire drawing phenomenon. The wire drawing of the hot melt glue not only affects the construction efficiency, but also affects the appearance of the product, and may even affect the bonding effect. So how to solve the problem of hot melt adhesive wire drawing?
Possible reason 1: The temperature of the glue tank in the drum hot melt glue machine is too low
Reason and solution: Low temperature will increase the viscosity of hot melt adhesive, that is, the thinner it is, the easier it is to draw. The melting temperature of the hot melt adhesive machine can be appropriately increased to reduce the viscosity of the hot melt adhesive. It should be noted that the temperature of the hot melt adhesive machine should not be raised too high to avoid carbonization of the hot melt adhesive.
Possible reason 2: The glue is too thick
Reason and solution: The thicker the pearl cotton hot melt adhesive, the easier it is to draw. If the thickness of the adhesive is thin, the speed can be increased, and the higher the speed, the less adhesive is needed. You can also adjust the thickness knob to look thinner. Or adjust the pressing height during the gluing process, not too low or too low. The easier it is to draw.
Possible reason 3: The viscosity of pearl cotton hot melt adhesive is too high
Reason and solution: The higher the viscosity, the easier it is to draw. Replace low viscosity hot melt adhesive particles or replace special formula non brushed hot melt adhesive particles
Ordinary hot melt adhesive will draw, but the difference is obvious. When encountering wire drawing problems, there is no need to be nervous. Sunlife Hot Melt Adhesive has been dedicated to the research and production of hot melt adhesives for over a decade. We are dedicated to providing our customers with high-quality products and excellent value services.
Kraft paper board book coverhot melt adhesive pelletsCan it stick? Many hardcover book and magazine factories are most concerned about weak adhesion and cracked book covers when making kraft paper covers. Hot melt adhesive particles, as the mainstream adhesive material for book binding, are fully capable of bonding kraft paper and cover paper. The key […]
What are the hot melt adhesives for filters? An air filter is a component used to purify the air. Filters are generally used in farms, laboratories, sterile rooms, car engines, car air conditioners, household air conditioners, household air purifiers, etc. 1、 Hot melt adhesive for flat filter The commonly used filter element is a high-efficiency […]
EVA hot melt adhesive material is a thermoplastic adhesive that is very different from ordinary cold glue. According to its characteristics, the following points must be grasped and paid attention to during use: 1、 Understand and master the various models and technical performance (parameters) of EVA hot melt adhesive. Different types of hot melt adhesives […]
The quality of book binding often depends not only on the equipment and paper, but also on the binding adhesive. If a book experiences problems such as page dropping, glue peeling, stiff spine, uneven flipping, and low-temperature brittleness, it is often related to the choice of binding glue, glue temperature, paper type, and process compatibility. […]