新闻中心
Buying hot melt adhesive granules should not only be based on price and color, but also on a set of feasible methods. We compared and evaluated the new material particles and miscellaneous materials from five dimensions, and the conclusion is very intuitive.
| Dimension | Good particles | Poor particles |
|---|---|---|
| Appearance | Uniform particles, no dust agglomeration | Different sizes, with debris |
| odor | Melting only has a light wax smell | Pungent and sour |
| Melting state | Good liquidity and no bubbles | Bubbling and poor wire drawing |
| bonding | The spine/box is securely fastened | Easy to fake, stick, and drop pages |
| Batch difference | Consistent across different batches | Stick today, don’t stick tomorrow |
On the same glue assembly line, the mixed brand particles are unevenly brushed at 180 ℃, and there are blank glue channels on the spine of the book; Sunlife hot melt adhesive particles penetrate evenly at the same temperature, and the book cannot be spread flat without shedding pages. The unit costs of the two are not significantly different, but there is a slight difference in yield.
Question: Is it better if the color is whiter?
Answer: No, the color depends on the formula, and the key is the melting and bonding performance.
Q: How to conduct initial screening without instruments?
Answer: Take a small amount of melted material, smell it, observe the bubbles, and test the adhesion on the machine. With three steps, 80% of the inferior materials can be eliminated.
Question: Are good particles necessarily expensive?
Answer: Not necessarily. Sunlife hot melt adhesive achieves high yield by relying on a stable formula, which is more cost-effective overall.
If you’re not sure, you need a sample first. Sunlife Hot Melt Adhesive from Guangzhou Sunlife Trading supports small sample machine comparison and evaluation.
What is used for edging hardcover book caseshot melt adhesive pelletsThree comparisons The edge wrapping process for hardcover book cases requires very strict requirements for hot melt adhesive particles: the adhesive layer should be thin and uniform, bend without breaking, and not overflow after curing. Guangzhou Sunlife Trading has provided three commonly used models for […]
Matching principle in one sentence:The faster the machine speed, the faster the required curing and the shorter the opening time; If the machine speed is slow or the workpiece is large and needs to be aligned over a long distance, it should be fixed and opened slowly insteadChoosing the wrong direction is either due to […]
Recycled kraft paper boxLow surface energy, high dust content, and easier detachment after moisture absorptionDirectly applying the sealing glue of the original cardboard box often opens the glue. The conclusion is:The regeneration box should be selected with “high initial adhesion, moisture resistance, and moderate penetration” sealing special rubber particlesAnd perform surface treatment before applying glue. […]
Implementing safety protocols and following best practices for workplace safety is crucial for the success of businesses, the safety of workers, and continuing to promote safer working conditions in order to prevent workplace injuries. Hot melt adhesive also poses other hazards to the workplace and requires special care to handle safely. The Development of Safety […]
