新闻中心
< p > < a href = "http://www.sunlife888.com" > hot melt adhesive books < / a > the applicable environment temperature 0 to 35 ℃. The main features include no stringing, high bonding strength, better bonding effect on relatively soft paper, high cost performance, and hot melt adhesive is a soft, sticky and flexible crystalline adhesive.
Compared with EVA, hot melt adhesive particles have higher heat resistance and better fuel resistance, acid resistance or chemical resistance. Compared with EVA, the adhesive force of hot melt adhesive particles is better at low temperatures.
Hot melt adhesive particle style:
Hot melt adhesives come in hot melt adhesive sticks and granular forms. Granular forms remain some of our most popular hot melt adhesive products.
We are more than happy to help you find the right hot melt adhesive for your application. Manufacturers do not always specify what type of hot melt adhesive their formula is, so it is difficult to find the right hot melt adhesive.
The main applications of hot melt adhesive for books:
Receipt
Magazine
Instruction Manual
First, let’s draw the conclusion: it depends on the substrate and temperature resistance Book binding, ordinary paper box sealing, selection Hot melt adhesive granules The EVA products inside are basically sufficient; When encountering difficult to stick plastics such as PP and PE, or packaging that requires low temperature/aging resistance, consider PO (polyolefin) type. The two […]
How much glue is needed to bond the density board? The surface of MDF is dense and smooth, with unclear fiber directionhot melt adhesive pelletsThe difficulty of bonding is higher than that of ordinary cardboard. The amount of glue applied is a key parameter – if there is less glue, it will not stick, and […]
Answer directly The surface of laminated business cards is dense and has low polarity, making it easy to “fake stick” when directly glued. The key is to choose the right adhesive type, treat the surface well, control the temperature and pressure, in order to stick firmly. Operating Steps Choose adhesive:Used for adhesive film and PVCHot […]
Direct answer: For paper bag rope adhesion, hot melt adhesive particles with high initial adhesion, good flexibility, and a softening point of 75-85 ℃ should be used. The diameter of the adhesive point should be 8-12mm, with one point at each rope hole. Press and hold for 3-5 seconds.The key is not in the amount […]
