新闻中心
Trends in binding hot melt adhesives and polyolefin adhesives: In recent years, the binding industry has had to adapt to many changes, including increasing production line speed and adopting polyolefin (POE) adhesives. Which products can help you meet the demands brought about by these developments and why?

Hot melt adhesive for faster binding line speed
High-speed book production, especially when bonding book spines with adhesive at low application temperatures, poses many challenges to adhesives. Hot melt adhesive must provide a strong adhesive force, but it should set fast enough to avoid dirtying the equipment during the finishing process, thereby avoiding the costly production downtime required for cleaning.
Specifically designed for use as low as 140°C Formulated for application at temperatures, they will operate safely on rapid production lines, bonding up to ” 10000 & have spent A magazine or book spine.
Why do bindings turn to polyolefins? (POE) Adhesive
Another trend in binding hot melt adhesives is the increasing use of polyolefin adhesives to replace alternative technologies such as PUR.
“
and ” PUR Unlike adhesives, polyolefin adhesives do not release harmful isocyanate-containing vapors into the workplace, so there is no need for a dedicated emission recovery system or preventive measures. In addition, they offer a faster solidification time, require less cumbersome internal management due to their longer pot life, and do not need to clean the melt tank and applicator (nozzle/roller) after each use.
Compatible with most hot melt equipment and processed in general municipal waste, polyolefin adhesives do not require additional equipment investment or waste disposal procedures.
Hot melt adhesive (taking the commonly used EVA system for book binding as an example) is a solid particle at room temperature. It is heated to 160-180 ℃ on the machine before melting into a liquid state and being able to wet and bond. After cooling, it re solidifies into a film. So there are […]
What coating method is used for laminating corrugated cardboard? Corrugated cardboard mounting (bonding of surface paper and corrugated core paper) is a high-frequency scene in the packaging industry.hot melt adhesive pelletsThe coating method directly affects the bonding quality, production efficiency, and adhesive cost. The following is a comparison list of four mainstream coating methods. 1. […]
Choose hot melt adhesive granules and focus on 7 key parameters: softening point, melt viscosity, opening time, curing time, initial adhesion, temperature resistance range, color and appearance. This article compiles the meanings, common ranges, and selection points of each parameter into a table, which can be directly compared and used by procurement and technology. List […]
Conclusion first: Try not to mix the same batch number across seasons as much as possible Hot melt adhesive granulesThe performance fluctuates significantly with temperature. High temperature and humidity in summer, low temperature and dryness in winter, using the same adhesive can easily lead to “summer rebound and winter cracking”. It is recommended to switch […]