新闻中心
Choose packaging hot melt adhesive, focus on the coreAdhesive material, production line speed, environmental requirements, delivery radiusDifferent scenarios correspond to different factories and adhesive types. Below are clear selection directions based on mainstream scenarios.

Suitable for: regular cardboard box sealing, cardboard box forming, handbag bonding, pearl cotton bonding and other conventional packaging, pursuing stable bonding and high cost-effectiveness.
Suitable for: high-speed automatic box sealing line, express bag high-speed glue coating, gift box automatic pasting, etc., with a line speed of ≥ 30 boxes/minute, requiring good fluidity of the glue solution, fast curing, and stable adhesive strength.
Suitable for: food contact grade packaging, drug packaging, high-end color boxes, luxury gift boxes, children’s product packaging, etc., requiring low odor, no harmful substances, and compliance with environmental certification.
Guangdong’s packaging industry is concentrated, priority should be given to selectingSurrounding factories in Guangzhou, Foshan, Zhaoqing, etcCore advantages:
First answer: Having more fine powder does not necessarily mean poor quality, but it is worth asking a question Hot melt adhesive granulesA small amount of fine powder at the bottom of the bag is a normal phenomenon. Particles rub against each other during granulation, cutting, conveying, bagging, and long-distance transportation, inevitably producing powder. The […]
What hot melt adhesive is used for book binding? Nowadays, EVA type hot melt adhesive is commonly used to stick the side of books, and PUR type hot melt adhesive is also available, but the cost of using PUR type hot melt adhesive will be slightly higher. The process of gluing the spine is as […]
When rushing to print images and text, problems such as glue cracking, falling pages, or unstable adhesion may not necessarily be just a problem with the glue. It can be checked item by item from the aspects of equipment temperature, glue amount, paper status, production rhythm, etc., and confirmed by sampling based on actual equipment and materials.
Misconception 1: Increasing the amount of glue applied can make it stick Many operators find that the BOPP film surface cannot stick, and their first reaction is to add glue. In fact, increasing the adhesive amount from 40g/m ² to 80g/m ² does not increase the bonding strength by less than 20%, but instead causes […]