新闻中心
The desk calendar is a hard demand for graphic and text fast printing stores during the peak season every year. The binding methods are divided into circle binding, glue binding, and loose leaf binding, with significant differences in corresponding glue particles. We conducted a horizontal evaluation of three mainstream adhesive particles, Sunlife Hot Melt Adhesive, and the conclusion is as follows:Circular packaging for initial adhesion, adhesive packaging for reading spine toughness, and loose leaf for durable flipping.

| Adhesive type | softening point | Opening hours | Suitable for binding | Unit Price Reference |
|---|---|---|---|---|
| SL medium temperature adhesive particles | 90℃ | 10s | Circular/Loose leaf | middle |
| SL high resilience spine glue | 98℃ | 12s | Rubber table calendar | upper middle |
| SL Low temperature quick adhesive | 82℃ | 6s | Thin paper sheet | middle |
Q: Will the calendar peel off when hung next to the heater?
If it is close to the heater (>40 ℃), ordinary medium temperature glue will stick back. It is recommended to use high softening point glue particles above 100 ℃.
Q: Where did the evaluation samples come from?
Guangzhou Sunlife Trading provides same batch evaluation packages, and graphic stores can send samples for testing before placing an order.
In one sentence: There is no universal way to bind calendars with hot melt adhesive granules, and it is most stable to match them according to the binding method.
Sealed boxHot melt adhesive granulesWhat should I do if I block the rubber hose? The sealing line is most afraid of rubber hose blockage: the dispensing speed may fluctuate, and even flow may be interrupted, resulting in poor sealing of the box. There are two common reasons for pipe blockage – incorrect glue temperature and […]
Tannic acid, also known as tannic acid, cannot be purchased solely based on price comparisons. Different processes have different requirements for raw material indicators, dissolution behavior, color, impurity control, packaging, and batch traceability. This article provides an inquiry and acceptance framework for leather, mineral processing, and other industrial use scenarios, and explains when it is […]
The curing speed and aging issues of EVA hot melt adhesive. Hot melt adhesive is a 100% solid adhesive without moisture and solvents. At room temperature, it is a solid and when heated to a certain degree, it becomes a fluid and viscous liquid adhesive. After melting, it appears as a light brown translucent body […]
When making wooden doors, door frames, skirting boards, and unpainted doors, it is often necessary to stick PVC edge strips or veneers to the edges of the substrate. Can this type of edge sealing be done with hot melt adhesive? The answer isOkay——Edge sealing is one of the typical uses of hot melt adhesive, which […]