新闻中心
Firstly, the result is that a high-end mooncake gift box factory often has curled edges and peeling glue on the pasted dough paper and box corners when making high-end mooncake gift boxes. After switching to Sunlife hot melt adhesive for fine decoration and pasting, adjusting the opening time and gluing process, the box corners fit snugly without warping, and the top and bottom covers fit smoothly. The return rate has decreased from 3% to below 0.5%.

The factory will send the box samples and tissues to Guangzhou Sunlife Trading. The technical judgment problem lies in the short opening time and insufficient initial adhesion, which caused the corners to solidify before the adhesive was compacted. Solution: Use special adhesive particles for fine decoration pasting with longer opening time and mild initial adhesion to facilitate workers to easily package corners and align them; Accurate control of the amount of glue applied to avoid glue overflow and penetration; Apply appropriate pressure at the corners to ensure a snug fit. The first batch of 200 sets will be tested, and after passing the fitting, flipping, and storage tests, the quantity will be measured.
| indicator | Before changing the adhesive | After changing the adhesive |
|---|---|---|
| Box corner curling/glue opening | About 3% | Less than 0.5% |
| Overflow glue and penetration glue | occasional | Basic elimination |
| Heaven and earth cover fitting | Unequal tightness/looseness | Smooth and consistent |
The key to choosing glue for the high-end box of the Heaven and Earth Cover is twofold: first, the opening time should be long enough to allow time for manual corner alignment; The second is the balance between initial and final adhesion, which can both locate and firmly adhere. The film coated paper also requires a high initial adhesion formula. Guangzhou Sunlife Trading can recommend corresponding models based on the paper material and process rhythm.
Q: Can the Tian Di Gai gift box be sealed with ordinary rubber granules?
Not recommended. The opening time of the sealing rubber particles is short, the initial adhesion is rapid, and it solidifies before the corners are aligned, making it easy to curl the edges. A special formula is required for fine decoration and pasting.
Q: What should I do if the coated paper always doesn’t stick firmly?
The film layer is smooth, and it is necessary to choose Sunlife hot melt adhesive special models with high initial adhesion and adhesive film coating, and apply pressure at the corners to significantly improve the bonding effect.
The experience of this case is that the edge curling and glue opening of the deluxe gift box often do not match the opening time and initial bonding process well. Choosing the right specialized adhesive particles can solve the problem.
In pearl cotton packaging processing, the procurement of hot melt adhesive should not only focus on whether it can stick or not. The surface of composite materials, pressing method, equipment cycle, product storage and transportation conditions, and appearance requirements all affect the actual adaptability. This article outlines the key issues that need to be confirmed […]
The annual 618 shopping festival is here! Sunlife Hot Melt Adhesive expresses gratitude and gives back!
The problem of pasting in a mooncake gift box factory Directly speaking, the result is that a boutique gift box factory in South China has switched to using Sunlife hot melt adhesive for pasting to adapt to the model, and the pasting process during the Mid Autumn Festival peak season has improvedThe repair rate for […]