新闻中心
Analysis of Hot Melt Adhesive Particles: Reasons for High Adhesive Temperature and Bubbles.
Hot melt adhesive particlesare a type of plastic adhesive. Their physical state changes with temperature within a certain temperature range. The chemical properties of hot melt adhesive are non-toxic and odorless. It is an environmentally friendly chemical.
Hot melt adhesive is usually melted by heating the adhesive. After tuberculosis, the colloidal state changes to liquid state. It can be made through coating, spraying, and peeling.
During the production process of the hot melt adhesive machine, bubbles may sometimes appear. What is the reason for the formation of bubbles? The reason for the formation of bubbles may be due to the presence of bubbles in the colloid itself, the presence of bubbles after melting, or the presence of moisture in the colloid, which can easily form bubbles when heated.
Another type is that the hot melt adhesive is damaged due to high temperature, decomposing to produce gas and bubbles. Therefore, the reason why hot melt adhesive decomposes due to high temperature depends on the composition of the hot melt adhesive.
This type of hot melt adhesive particle is composed of thermoplastic elastomer, softener, and resin. Resin and plasticizer are small molecules. There are many unsaturated bonds in the molecule. Molecular bonds are unstable. When heated to very high temperatures, they react with oxygen in the air.
It produces gases such as carbon dioxide, which in turn creates bubbles.
Why do hot melt adhesive particles emit a lot of smoke during the heating process? When using hot melt adhesive, its viscosity can only be affected by heating. The hot melt adhesive equipment used in industry cannot do without a heating system. Sometimes, there may be a large amount of abnormal smoking during the heating […]
1) hot melt adhesive for cartons is a common adhesive used in the sealing of boxes and cartons. 2) This is about sealed flaps. The application of adhesive is usually the end process of the production line and involves applying the adhesive at high temperatures to open the fins, and then bringing the fins into […]
EVA hot melt adhesive is different from regular cold melt adhesive. According to its characteristics, the following points must be mastered and noted during use: 1、 Understand and master the models and technical performance (including technical parameters) of each EVA hot melt adhesive. Different types of hot melt adhesives have different opening and curing times. […]
First, correct the conclusion: Hot melt adhesive particles do not have better viscosity at higher temperatures. Heating for a long time above the recommended temperature of 10 ℃ will cause the colloid to oxidize and degrade, resulting in a decrease in adhesive strength instead of an increase. It can also cause a series of problems […]