新闻中心
There is no unified “melting point” for hot melt adhesive particles, which are more commonly used in the industrysoftening pointandRecommended temperature for useTo describe. The softening point of common EVA hot melt adhesive particles is about 70 ℃ -110 ℃, while the actual coating (gluing) temperature is usually between 150 ℃ -190 ℃ – much higher than the softening point, because it needs to fully melt and flow to penetrate the paper fibers.

| Type | softening point | Recommended coating temperature |
|---|---|---|
| Universal EVA | About 80-95 ℃ | 160–170℃ |
| High viscosity EVA | About 90-105 ℃ | 170–180℃ |
| Low temperature fast solidification | About 70-85 ℃ | 150–160℃ |
Q: Is a lower melting point better for use?
Answer: No, low melting point is prone to clumping in summer, it depends on the stability of the formula.
Q: Can particles be selected by melting point?
Answer: It depends on whether the recommended coating temperature matches the model. Sunlife hot melt adhesive is provided with a process card for each batch.
Q: How to remedy the temperature setting error?
Answer: Immediately call back to the recommended range, clean the carbonized rubber, and avoid pipe blockage.
We need an accurate temperature window to obtain the process parameters for the corresponding model of Sunlife hot melt adhesive from Guangzhou Sunlife Trading.
The aging of hot melt adhesive is quite common in its application. This phenomenon is mainly caused by the glue heating time being too long or the heating temperature being too high. How to determine if hot melt adhesive has aged? Aging hot melt adhesive may exhibit the following phenomena: 1、 Glue discoloration; 2、 There […]
There are many types of adhesives, including hot melt adhesive, water-based adhesive, oil-based adhesive, etc. Different adhesive curing methods, speeds, times, and forms vary. What is the difference between hot melt adhesive and water-based adhesive for cardboard packaging? 1. Hot melt adhesive for cardboard packaging Firstly, let’s talk about hot melt adhesive. Hot melt adhesive […]
What are the environmentally friendly adhesives? Adhesive is any substance that binds two objects together – essentially glue. The objects adhered together by our adhesive are considered as “substrates”. Have you ever made a grilled cheese sandwich? Once melted and cooled, cheese can be considered as a binder that binds two slices of bread (substrate) […]
Uneven glue application, first check the glue roller The glue roller on the book binding line is used for coatinghot melt adhesive pelletsThe core components. Once the roller surface is worn, the adhesive layer will experience uneven thickness, breakage, overflow, and other problems, directly affecting the bonding strength and appearance quality of the spine. Typical […]