新闻中心
Pearl cotton hot melt adhesiveMany customers often encounter the phenomenon of weak adhesion when using a roller hot melt adhesive machine to glue pearl cotton. This is because the amount of glue is not enough, resulting in poor adhesion. However, increasing the amount of glue will cause waste and increase costs. So it is necessary for us to adjust the machine to achieve perfect glue application, which will not cause a lot of waste or weak bonding.

1、 The roller height is adjustable. Generally, the lower the roller, the more adhesive it comes into contact with and the more adhesive it carries out. On the contrary, the higher the height of the drum, the less adhesive it comes into contact with, and the less adhesive it carries out.
2、 The drum speed is adjustable. When the speed is fast, the amount of glue applied to the drum will be less. When the speed is slow, more glue will be applied to the drum.
We need to adjust the height and speed of the drum to adjust the glue application amount to the most suitable range, in order to achieve the optimal glue application amount (the minimum glue application amount that does not affect the bonding effect).
In addition, the temperature of the hot melt glue machine and the temperature of the drum have an impact on the amount of glue applied, because the higher the temperature, the lower the viscosity of the hot melt glue, and the less glue it brings. On the contrary, the lower the temperature, the higher the viscosity and consistency of the hot melt adhesive, thereby producing the glue. There will be more. The temperature of the melting pot is the same.
The performance and effect of the hot melt adhesive used for producing hand-held paper bags of different materials vary depending on the model used. Choose the right one< strong> Suitable for hand-held paper bags used for expensive gift packaging. Generally, white cardboard is used as a material for making hand-held paper bags. For white cardboard […]
Direct answer: The most secure arrangement for sealing and gluing points is to leave 20-30mm at both ends, evenly distribute in the middle, and cover a total length of about 60% -70% of the sealing length. The common three-point, five point, and strip continuous methods have their own applicable scenarios. Choosing the wrong arrangement not […]
Finding the right hot melt adhesive for your product can be challenging, and the hot melt adhesive particles purchased in stores often cannot meet your needs. To find a product that perfectly suits your goals, please consider purchasing from the manufacturer of Guangzhou Sunlife Hot Melt Adhesive. There are several products to choose from, and […]
The acceptance of pearl cotton hot melt adhesive should not only focus on whether it sticks when just pressed. For the processing of cushioning packaging, lining, and combination packaging, appearance, positioning, and adhesive performance after cooling are equally important as batch operation stability. This article provides a practical on-site judgment method. Core KeywordsPearl cotton adhesive, […]