新闻中心
Hot melt adhesive particles produced by legitimate manufacturers have a very low odor. Taking EVA based hot melt adhesive granules commonly used in book binding, packaging and sealing, and quick printing of graphics and text as an example, they are solid particles at room temperature and almost odorless; After heating and melting, there will be a slight odor, but qualified food grade and book grade products have a very light odor, which will dissipate in a few seconds in a ventilated environment.

The odor mainly comes from two aspects: one is that there are too many low molecular weight volatile compounds in the raw materials, and the other is that there are too many recycled materials mixed in. Pure new material and clean formula particles only have a very light wax smell when melted; If it is pungent, sour or even spicy to the eyes, it is mostly due to inferior materials or mixed with recycled materials. All particles of Sunlife hot melt adhesive are produced using new materials, and Guangzhou Sunlife Trading conducts odor and volatile matter testing on each batch to ensure that the workshop is user-friendly.
Q: Will the odor remain on the books when hot melt adhesive particles are used in the workshop of the book and magazine factory?
Answer: No. After the adhesive layer cools, the odor is basically sealed inside the adhesive, and readers cannot smell it after the book is completed, which meets the odor requirements of publications.
Q: Does a strong odor indicate toxicity?
Answer: It is not necessarily toxic, but a pungent smell usually means that there are many volatile substances, the formula is not clean, and long-term inhalation is not conducive to health. It is recommended to replace with qualified products.
Q: How to determine if the purchased hot melt adhesive particles have a qualified odor?
Answer: Take a small amount and melt it at around 180 ℃. Close it up and smell it lightly. A light wax smell is normal; If it is obviously pungent or irritating, it should be returned.
Sunlife hot melt adhesive from Guangzhou Sunlife Trading provides samples for trial use. The odor and bonding effect can be verified in small batches on our own production line before deciding on bulk purchases.
Hot melt adhesive is a type of plastic polymer adhesive. Within a certain temperature range, its physical state will change with the temperature. EVA hot melt adhesive is an environmentally friendly chemical product. During use, sometimes hot melt adhesive may be pulled out after melting. What is the reason for drawing hot melt adhesive after […]
Is environmentally friendly hot melt adhesive really environmentally friendly? Hot melt adhesive has fast bonding speed, stable performance, and is conducive to sustainability. Automation technology tells operators that it is highly cost-effective. And in the process of using hot melt adhesive, there is no need for a drying process, the bonding process is simple, the […]
More and more manufacturers are using EVA hot melt adhesive to process books and other materials, regardless of the size of the processing plant, there will still be an upward trend in the future. This is because using this adhesive has the advantages of fast book publishing, short cycle time, beautiful appearance of books, and […]
Thread-sewn perfect bindingStill need to use hot melt adhesive particlesThe only difference is the dosage and location compared to wireless adhesive packaging. The sewing thread connects the book stickers one by one, solving the root problem of loose pages in the text; But the smoothness of the book back, the fit between the spine and […]