新闻中心
Many book and magazine factories purchase hot melt adhesive granules based on “feeling”, resulting in either material shortage, production stoppage, or stockpiling and occupying warehouses. In fact, the dosage can be calculated very accurately: the glue consumption per book ≈ the spine coating area x the glue layer thickness x the glue density. Taking an A5 book with a spine width of 2cm, a coating height of 2cm, and a glue thickness of 0.3mm as an example, a single book weighs about 0.12 grams, and 10000 books weigh 1.2 kilograms.

| Steps | method |
|---|---|
| 1. Test single book | The difference in weight between the empty spine of the book and the adhesive coating results in adhesive consumption per book |
| 2. Categorize by category | Record separately by paper type and thickness, and establish a glue consumption ledger |
| 3. Batch production | Single book glue consumption x planned number of volumes x 1.05 loss coefficient |
| 4. Customized procurement | Based on inventory and delivery time, determine the quantity for each purchase |
Q: How much does one Sunlife hot melt adhesive weigh?
Answer: The standard weight is 25kg per pack. Based on the consumption of glue per book, the starting point is about half a pack of 10000 A5 books, depending on the paper type.
Question: Does overflow glue count as loss?
Answer: Calculate. Excessive glue overflow indicates incorrect coating parameters or glue type, and adjusting the machine is more cost-effective than buying more glue.
Q: How to estimate small batch trial orders?
Answer: First, use the machine scale difference method to measure dozens of books and take the average, then enlarge it, and the error is very small.
Guangzhou Sunlife Trading can help calculate the recommended purchase quantity of Sunlife hot melt adhesive according to your book type to avoid material breakage or warehouse pressure.
What is the packaging adhesive industry? There are many types of adhesives in the packaging industry, and many different types are used according to the situation. To laminate adhesives for flexible packaging, or to use combinations of different materials such as printing layers, or just some examples of these different situations. If necessary, high-speed bonding […]
Everything in the world has two sides. For environmentally friendly hot melt adhesive manufacturers involved in the adhesive industry, our accumulated industry and production experience deeply understand that hot melt adhesive particles, like anything else, not only have many unique advantages, but also inherent disadvantages. Undoubtedly, we want to understand the advantages of hot melt […]
EVA hot melt adhesive is different from regular cold melt adhesive. According to its characteristics, the following points must be mastered and noted during use: 1、 Understand and master the models and technical performance (including technical parameters) of each EVA hot melt adhesive. Different types of hot melt adhesives have different opening and curing times. […]
The curing speed of EVA hot melt adhesive refers to the time from the beginning of adhesive bonding to the moment when the bonding strength reaches 80%. The curing time required for general use ranges from 1 second to 10 seconds, and the curing speed required for automatic sealing is generally within 4 seconds. There […]