新闻中心
This is a completely normal physical phenomenon. Hot melt adhesive particles are thermoplastic materials with a fixed softening point (usually between 70 ℃ -110 ℃). When the temperature in the warehouse is high and close to the softening point, the particles will soften or even slightly clump; In winter, it becomes hard and brittle at low temperatures, and can be easily pinched by hand. As long as it does not melt or carbonize, it does not affect its use.

If the particles become sticky, oily, and agglomerate at room temperature (around 25 ℃), it indicates a low softening point or the addition of low melting point recycled materials. This type of material is prone to pipe blockage and cannot stick firmly on the machine, and should be stopped. The softening point of Sunlife hot melt adhesive particles is clearly marked, and the inventory at room temperature is stable. It is not soft in summer and not powdery in winter.
Q: Will pouring hard particles directly into the glue tank in winter damage the machine?
Answer: No, it will return to flow after melting; But for large clumps, it is recommended to crush them first to avoid getting stuck and stirring.
Q: Can we set a uniform temperature for the air-conditioned room?
Answer: Yes, constant temperature inventory is ideal as it can reduce seasonal performance fluctuations.
Q: Should the temperature of the glue tank be lowered in summer?
Answer: The temperature of the environment can be lowered by about 5 ℃, but it is important to ensure fluidity and not lower than the recommended lower limit.
Sunlife Hot Melt Adhesive from Guangzhou Sunlife Trading provides seasonal storage suggestion cards to help the production line minimize seasonal fluctuations.
Sealed boxHot melt adhesive granulesWhat should I do if I block the rubber hose? The sealing line is most afraid of rubber hose blockage: the dispensing speed may fluctuate, and even flow may be interrupted, resulting in poor sealing of the box. There are two common reasons for pipe blockage – incorrect glue temperature and […]
Tannic acid (also known as tannic acid) is a natural polyphenolic compound extracted from plants such as gallnuts. Its core value lies in high purity, strong stability, and low impurities. It is widely used in food clarification, pharmaceutical antibacterial, industrial rust removal, mineral processing and purification, and other fields. The purity of tannic acid on […]
The dust-free workshop (food, electronics, medical equipment packaging) is sealed with hot melt adhesive particles, and the core is three words: low smoke, low odor, and less dust. Prioritize the selection of low odor and low volatility rubber particles, and control the temperature, clean the pot frequently, and add glue in a standardized manner during […]
What is melt index (MI)? Melt Index (MI) representshot melt adhesiveFlow velocity at specified temperature and pressure, in g/10min. The higher the MI, the better the fluidity of the adhesive solution; The lower the MI, the more viscous the adhesive. The MI value directly affects the coating method, penetration depth, and bonding effect, and is […]