新闻中心
I need it. Taken from a cold storage or low-temperature environmentHot melt adhesive granules，It must be warmed up to room temperature in the workshop before openingOtherwise, if the outside of the bag is cold and the air is hot, water vapor will condense on the surface of the particles, causing bubbles, white spots, and weak adhesion when the machine is used. Compare the two methods of “cold inventory” and “room temperature memory” below.
In summer, the workshop is hot, so it is right to store the rubber particles in the cold storage to prevent softening. However, if the bags are directly torn off during the outbound process, moisture will instantly condense on the particles. The correct approach is to move the bag to the workshop and let it sit for 4-8 hours to warm up before opening it. When the bag surface is no longer cold, open it again.
Rubber particles are most afraid of long-term high temperature and sun exposure. As long as the room temperature is cool, ventilated, not exceeding 30 ℃, and far away from heat sources, it is actually more convenient than cold storage and prevents condensation. The disadvantage is that the temperature in the south may be higher in summer, and temperature control storage is required.
| way | Advantages | risk | key action |
|---|---|---|---|
| Cold inventory | Anti softening | Dewing during outbound shipment | Return to temperature for 4-8 hours before opening |
| Room temperature storage | No condensation | Afraid of high temperatures | Shade ≤ 30 ℃ |
Q: What happens if the temperature is not enough to return to the machine?
Answer: The particles carry water, and when they melt, the water vapor turns into bubbles and white paper, causing a decrease in adhesion and making the back of the book flower.
Q: Can the adhesive that has already condensed still be used?
Answer: Slightly spread it out and let it dry in the shade before drying it again; It is recommended to discard items that have been severely affected by moisture and clumping. Don’t gamble.
Question: How to store it most stably?
Answer: Guangzhou Sunlife TradingSunlife Hot Melt AdhesiveEach bag has a moisture-proof lining and is equipped with a cool storage and outbound temperature recovery process, which can also be managed in small batches.
Remember: The rubber particles taken out of the cold storage should be warmed up before opening, and the temperature should be controlled in the room at room temperature to prevent condensation and white spots from coming knocking on the door.
The desk calendar is a hard demand for graphic and text fast printing stores during the peak season every year. The binding methods are divided into circle binding, glue binding, and loose leaf binding, with significant differences in corresponding glue particles. We conducted a horizontal evaluation of three mainstream adhesive particles, Sunlife Hot Melt Adhesive, […]
First, provide a reference scale Based on the estimation of 1 gram of glue consumption per common small and medium-sized cardboard box and single box, one tonHot melt adhesive granulesApproximately one million boxes can be sealed; A single box consumes 2 grams of glue, which is about 500000 pieces. The reason why the range is […]
The benefits of handbag glue for food packaging: The use of hot melt glue is widely applied in various industries. Food is one of the areas where your application has experienced significant growth. We are now confronted with increasingly demanding consumers who demand elegant and practical packaging, high-end quality processing, and most importantly, respect for […]
General conclusion:Standard spot models can be shipped within 1-3 days, non-standard customized or color matching models within 7-15 days, and export orders with third-party testing reports within 15-25 days.But this is just an ideal state, what really determines when you can turn on is the following 8 factors. By checking them one by one, the […]
