新闻中心
The storage method of hot melt adhesive particles after opening directly determines whether they can still be used and whether they stick firmly. We took the same batch of Sunlife hot melt adhesive particles and stored them in three different ways for one month. We compared the moisture, clumping, and bonding performance, and the results were very intuitive.

| way | Operation | Status after one month | Adhesive performance |
|---|---|---|---|
| Open stacking | Remove the bag without sealing it and place it on the ground | Moisture absorption, clumping, and bubbles | Obvious discount, easy to fake and stick |
| Sealed and cool | Tighten the inner bag, elevate the pallet, and avoid light | Dry and free from lumps | Almost no attenuation |
| The original package has not been opened | Whole box sealed inventory | Intact as new | best |
The open stacked particles are filled with bubbles after melting, and the spine of the book is unevenly brushed; The difference between the sealed cool group and the unopened group is minimal. It is not the act of “opening” that determines lifespan, but ratherMoisture and heat resistanceHas it been done properly. Sunlife hot melt adhesive from Guangzhou Sunlife Trading has good sealing performance in its original packaging. As long as the seal is restored in a timely manner after material collection, it can be stored for 3-6 months without any problems.
Q: Can drying the rubber granules that have been opened for a long time save them?
Answer: Mild moisture can be dried at low temperature and melted again, but the adhesive strength has been compromised. It is not recommended to gamble on important tasks.
Q: How long is the shelf life of Sunlife hot melt adhesive?
Answer: The original package is usually over 18 months old, and Guangzhou Sunlife Trading follows a first in, first out policy for shipping, ensuring fresh delivery upon arrival.
Q: Is it easier for Kaifeng to spoil in summer?
Answer: Yes, in humid and hot environments, moisture absorption is fast, and sealing and dehumidification are more important. Small package packaging is more worry free.
If you are afraid of being damaged, you can use and replenish in small quantities as needed. Sunlife hot melt adhesive from Guangzhou Sunlife Trading supports packaging small packages to reduce storage pressure after opening.
Hot melt adhesive granulesHow to read the test report? Legitimate hot melt adhesive particles should come with a testing report when leaving the factory. Newcomers are often discouraged by a bunch of indicators, but in fact, by grasping a few key items, one can judge whether it is good or bad. Below is a comparison […]
EVA hot melt adhesive is inexpensive and widely used in the industrial field – but which products are commonly made with hot melt adhesive? The following are the six most common applications in manufacturing: 1) Quick assembly, recyclable cardboard boxes The transport packaging industry is a major user of EVA hot melt adhesive seals. […]
How much glue is needed to bond the density board? The surface of MDF is dense and smooth, with unclear fiber directionhot melt adhesive pelletsThe difficulty of bonding is higher than that of ordinary cardboard. The amount of glue applied is a key parameter – if there is less glue, it will not stick, and […]
Sustainable hot melt adhesives for handbag manufacturing are increasingly needed by consumers and businesses for products that can meet environmental requirements while still achieving their core purposes. Handbags are no exception. Trends show a clear shift from plastic to paper, and some countries have completely banned the use of plastic bags. The < figure class="wp […]