新闻中心
How to reduce the drawing problem of packaging hot melt adhesive? The manufacturer’s downtime may come at a high cost. Preventing production issues and maintaining production line operation are crucial for brand owners. Threading is a common issue that affects consumer packaging. Reduce the drawing of hot melt packaging adhesive by making some easy to implement changes to three variables (equipment, environment, and adhesive).
Equipment: Check the settings every time the production line is changed
1. Check the position, angle, temperature, nozzle size, and condition
2. Confirm that the nozzle head is not blocked and in good condition
3. Check the distance between the nozzle and the substrate to determine if it can be reduced
4. Check the filter and hose to confirm that there is no accumulation or carbonization
5. Check the solenoid valve and fuel tank pressure
Environment: Environmental temperature and airflow can impactPackaging hot melt adhesive
1. Reduce direct airflow to avoid high viscosity and premature adhesive drying
2. Review the airflow in the production area to ensure that the fans and; HVAC The system will not directly blow towards the application point. This is more critical in applications where the distance between the nozzle and the package is large.
3. Substrate temperature is also a factor
Adhesive: Specific operating parameters are set by the formula
1. Check if the temperature of the hot melt tank is correct. If the hot melt adhesive is too sticky, the temperature may be too low
2. If the applicator and hose are not hot enough, please confirm to set the applicator temperature according to the recommended operating instructions, and then the adhesive will start to cool when moving from the can to the applicator
3. Confirm with the adhesive supplier that the correct adhesive has been used in the application. Some adhesives are easier to draw than others.
Smell is not a small matter Book and magazine factories, graphic and text stores, food packaging workshops,Hot melt adhesive granulesOdor directly affects worker comfort and customer perception. But the typical misconception is that ‘strong odor equals firm adhesion’, and there is no necessary relationship between the two. 5 common misconceptions Misconception 1: The stronger the […]
Kraft paper board book coverhot melt adhesive pelletsCan it stick? Many hardcover book and magazine factories are most concerned about weak adhesion and cracked book covers when making kraft paper covers. Hot melt adhesive particles, as the mainstream adhesive material for book binding, are fully capable of bonding kraft paper and cover paper. The key […]
< p > in the food packaging industry commonly used in the < a href = "http://www.sunlife888.com" > < strong > food packaging hot melt adhesive < / strong > < / a >. It has the characteristics of being white, smokeless, odorless, and free of solvents and plasticizers. Hot melt adhesive can bond PS […]
The acceptance of pearl cotton hot melt adhesive should not only focus on whether it sticks when just pressed. For the processing of cushioning packaging, lining, and combination packaging, appearance, positioning, and adhesive performance after cooling are equally important as batch operation stability. This article provides a practical on-site judgment method. Core KeywordsPearl cotton adhesive, […]
