新闻中心
< p > in the food packaging industry commonly used in the < a href = "http://www.sunlife888.com" > < strong > food packaging hot melt adhesive < / strong > < / a >. It has the characteristics of being white, smokeless, odorless, and free of solvents and plasticizers. Hot melt adhesive can bond PS bottles very well, and the sealing film is easy to peel off. There are two types of candy packaging: jelly and hard candy. This adhesive has a low enough viscosity and is easy to apply. The surface smoothness is good, which prevents the coated candy paper from clumping during storage or transportation and ensures the good sealing condition of the packaging.

Characteristics of hot melt adhesive for food packaging:
Excellent thermal stability, no yellowing.
Odorless and smoke-free, creating a good working environment.
The coating surface is smooth, preventing clogging.
Application of Hot melt Adhesive in Food Packaging:
Other food packaging
Choose packaging hot melt adhesive, focus on the coreAdhesive material, production line speed, environmental requirements, delivery radiusDifferent scenarios correspond to different factories and adhesive types. Below are clear selection directions based on mainstream scenarios. 1、 Ordinary cardboard box/sealed box (universal EVA adhesive, cost-effectiveness priority) Suitable for: regular cardboard box sealing, cardboard box forming, handbag bonding, […]
What should I do if the hot melt adhesive particles are not firmly attached to the coated paper? Direct answer: The root cause of the poor adhesion of laminated paper is mostly due toLow membrane surface energy, glue not eating paper fibers, poor coordination between opening time and compressionThese three points. The surface of laminated […]
Direct answer: The width of the side glue for regular 16 open books and magazines is 4-6mm, for 32 open books it is 3-5mm, and for large 16 open or thick books (book spine exceeding 20mm) it can be relaxed to 6-8mm. The width of the side glue should be “able to effectively grasp the […]
Hot melt adhesive granulesWhat is the typical melting point? There is no unified “melting point” for hot melt adhesive particles, which are more commonly used in the industrysoftening pointandRecommended temperature for useTo describe. The softening point of common EVA hot melt adhesive particles is about 70 ℃ -110 ℃, while the actual coating (gluing) temperature […]