新闻中心
Handbags, as a packaging product, are widely used in the natural market, which is beneficial for the hot melt adhesive in the handbag market. There are many grades of handbags themselves, and the packaging displayed also varies. To know which hot melt adhesive is good for handbags, first you need to know the grade of the handbag.
Is the hot melt adhesive used for handbags related to its grade? Yes. This is because the packaging requirements for handbags are different. The demand for high-end gift packaging is different from ordinary packaging, and the grade of handbags used is also different. The production requirements for handbags of different grades vary. Therefore, the application requirements for hot melt adhesive used in handbags are different.
Handbag hot melt adhesive has strong adhesion and is also affordable. It can be seen that the quality of hot melt adhesive used in handbags depends entirely on the quality of the handbag and the attitude of the manufacturer. For handbags with a large carrying capacity, in addition to using tough materials to make the bag, it is also necessary to use strong hot melt adhesive to stick the bottom and edges of the bag. High end gifts should be paired with high-end handbag packaging, and when selecting hot melt adhesive for handbags, high-performance hot melt adhesive should be used. Quality and demand must be linked one by one.
It is up to the customer the final say whether the hot melt adhesive is easy to use in handbag production! According to the demand in the handbag packaging market,Hot melt adhesive manufacturerscan meet all the needs of handbag packaging, produce and improve the performance of hot melt adhesive. Which type of handbag hot melt adhesive can best meet their production needs, and which type of handbag with hot melt adhesive has a better chance of winning the market.
More and more books are using EVA hot melt adhesive for binding process. Almost all of them are used in large, medium, and small processing plants across the country. There will still be an upward trend in the future. This is because using this adhesive results in fast book publishing speed, short cycle time, aesthetically […]
Direct answer: The consumption of adhesive particles is relatively high, and 90% of the problem lies in four areas – excessive setting of adhesive amount, waste caused by improper temperature, equipment leakage, and mismatched selection of adhesive particles. After item by item investigation, most factories can reduce unit adhesive consumption by 15% -30% without sacrificing […]
Many masters feel that “keeping the glue pot on is the most electricity consuming”, so they frequently switch it on and off. actuallyRepeated cold start consumes more power and damages equipment than insulationBelow are three common misconceptions. Misconception 1: Keeping it on=burning at full power all the time The glue pot isThermostat ControlAfter reaching the […]
How to use EVA hot melt adhesive? In use, it is often heard that ‘how to use hot melt adhesive?’ or some customers may find that the use of hot melt adhesive is not standardized, which can affect the bonding effect. Today we will explain how to use hot melt adhesive correctly. EVA hot melt […]
