新闻中心
Compared with traditional EVA hot melt adhesive and other adhesive chemicals, EVA hot melt adhesive has many advantages. Let’s briefly understand some of the advantages of EVA hot melt adhesive. We like hot melt adhesive for a reason.

What are the advantages of EVA hot melt adhesive
1. Excellent heat resistance: It can usually replace polyamide hot melt adhesive, structural adhesive, or other more expensive and difficult to glue adhesives. 2. Excellent cold resistance: using copolymers and formulated products. 3. Low cost: It can usually replace more expensive hot melt adhesives and other adhesives, which are 10 times more expensive.The main components of EVA hot melt adhesive particles are EVA, tackifying resin, and wax, most of which are composed of adhesive to firmly bond with various substrates.
What is the reason why EVA hot melt adhesive does not stick? Some time ago, a customer asked us why we couldn’t stick books firmly when bonding. Through this small case, we will answer the question: What is the reason why hot melt adhesive does not stick? When bonding books, if EVA hot melt adhesive […]
EVA hot melt adhesive, which is brittle in winter and prone to cracking in summer, belongs to the normal characteristics of thermoplastic materials and is not a product quality issue. It is strongly recommended to prioritize adjusting equipment temperature and production processes, and replace seasonal adhesive when the environment is extreme. At the same time, […]
What are the hot melt adhesives for filters? An air filter is a component used to purify the air. Filters are generally used in farms, laboratories, sterile rooms, car engines, car air conditioners, household air conditioners, household air purifiers, etc. 1、 Hot melt adhesive for flat filter The commonly used filter element is a high-efficiency […]
Analysis of aging reasons of EVA hot melt adhesive during use? Many customers encounter a decrease in viscosity and insufficient bonding strength of EVA hot melt adhesive after prolonged use. It is usually considered that the product quality is poor. However, this is not the case. This phenomenon is likely caused by the aging of […]