新闻中心
Is EVA hot melt adhesive a thermoplastic adhesive or a thermosetting adhesive? Many people who are not very familiar with adhesives do not know the difference between thermosetting adhesives and thermoplastic adhesives. These two types of adhesive products have essential differences, and it is precisely because of these differences that they vary greatly in terms of methods and application scopes. So, what are the differences between thermosetting adhesives and thermoplastic adhesives? Here is a brief introduction for everyone.

< p > < strong > < a href = "http://www.sunlife888.com" > EVA hot melt adhesive < / a > < / strong > is a kind of thermoplastic adhesive. We know that many adhesives require heating during the bonding process. For hot melt adhesive, heating means melting it. Since hot melt adhesive is solid at room temperature, it can only melt into a liquid state when heated and adhere to the surface of the objects to be bonded.
Thermosetting adhesives also need to be heated during application because under certain temperature conditions, the chemical substances in the components of the thermosetting adhesive will accelerate the chemical reaction and rapidly transform from a linear molecular structure to a network cross-linked structure. Due to the chemical reactions that occur throughout the process, thermosetting adhesives are usually referred to as reactive adhesives.
EVA hot melt adhesive is melted by heating, while thermosetting adhesive is cured by heating. Whether it is hot melt adhesive or thermosetting adhesive, they each have their own advantages and disadvantages and are widely used in their respective fields. Hot melt adhesives are more efficient, and because they are solid at room temperature, they are cleaner and more environmentally friendly.
Homework books, receipts, test papers, and other cultural and educational printed materials should be bound with glue that is quick drying, easy to tear, and not drawn. How to choose between Sunlife 29A/29B adhesive and 39D paper adhesive? Explain it clearly in one go.
The standard for wireless adhesive packaging of books and periodicals is a single layer of back glue and one layer of side glue. Double pass is only considered for thick books/dense paper/loose powder paper/high demand books, as double pass has the cost of compressed opening time. Do not blindly increase the number of passes.
After the wireless adhesive book is taken offline, sometimes the back of the book looks fine and doesn’t drop pages, but when you open it,Single or multiple inner pages “wave up”, “curl up”, and “become uneven” on their own——Like wrinkles that have been soaked and dried by water. This kind of “waves/warping of the book […]
The true cause of blistering on the spine of a book The appearance of bubbles (visible bulges or internal cavities) on the spine of the adhesive book is a quality taboo, and customers will directly judge it as unqualified. Many people think that foaming is a problem with the glue coating process, but in realityhot […]