新闻中心
The pages of three-dimensional books and flipped books need to be repeatedly folded, and ordinary books and magazines have hard and brittle rubber particles that break when folded. To stick firmly, one must avoid the four misconceptions of “using ordinary glue, applying too thick, pressing too hard, and not trying to fold”, choose flexible and highly elastic glue types, and control thin glue layers.
Ordinary EVA book adhesive is relatively hard, and frequent bending of three-dimensional book pages can cause cracking along the adhesive layer. Choose a formula with low tenderness and high elasticity, which will rebound without whitening after bending.
On the contrary. The thick adhesive layer is hard and has high internal stress, making it more prone to breakage at the fold. Thin and even glue lines are actually flexible and durable. It is recommended to reduce the amount of glue applied and apply it with a thin nozzle.
Stereoscopic books have hollow and folded structures, and heavy pressure can flatten the paper art. Use light pressure to fix quickly, allowing the glue to “bite” the paper fibers without damaging the structure.
Stereoscopic books rely on folding and folding, and must undergo dry wet cycle folding tests (such as 200 opening and closing cycles) before mass production, otherwise they will scatter in the hands of readers.
| misconception | consequence | correct answer |
|---|---|---|
| Use hard glue | It will crack when folded | Choose flexible high elasticity |
| Too thick coating | Internal stress fracture | Apply thin adhesive evenly |
| heavy pressure | Crush paper art | Light pressure fast solidification |
| Do not attempt to fold | Get it and scatter it | Folding test |
Q: Do children’s pop-up books have additional requirements for glue?
Answer: Yes, it should have a low odor and meet the environmental protection requirements for toys and stationery contact. Do not use industrial adhesives with strong irritants.
Q: Who should I look for for for small-scale sampling?
Answer: Guangzhou Sunlife TradingSunlifehot melt adhesiveThere is a flexible series of graphic and text quick printing, which can be sent for sample folding verification to confirm that there is no cracking before adding quantity.
The three-dimensional book is firmly adhered by “flexible adhesive+thin adhesive layer+light pressure+trial folding”, avoiding the four misconceptions, and can be flipped thousands of times without scattering.
Direct answer: The consumption of adhesive particles is relatively high, and 90% of the problem lies in four areas – excessive setting of adhesive amount, waste caused by improper temperature, equipment leakage, and mismatched selection of adhesive particles. After item by item investigation, most factories can reduce unit adhesive consumption by 15% -30% without sacrificing […]
Quick print shops often encounter orders with small quantities, multiple sheets, multiple covers, and tight delivery times. A more practical approach than searching for “universal binding glue” is to establish a process for confirmation, trial assembly, and parameter retention before changing orders. This article explains how to reduce rework from daily order taking scenarios. Core […]
Hot melt adhesive particles are a type of thermoplastic adhesive. At room temperature, it is a solid state, but due to the influence of temperature increase, it will flow softly and reach a liquid state at high temperatures. After being applied to the surface of the material, the hot melt adhesive will lose heat and […]
How to solve the troubleshooting of packaging hot melt adhesive? Hot melt adhesive is some of the most advanced adhesives used today, but even with daily maintenance, adhesive problems can still occur. This guide aims to help manufacturers overcome some of the most common adhesive challenges faced in packaging applications. There may be various reasons […]
