How to store hot melt adhesive particles without clumping? Storage List

Hot melt adhesive granulesHow to store without clumping?

Hot melt adhesive particles agglomerate, mostly due to moisture, heat, or pressure. As long as the “moisture-proof, heat-resistant, and pressure resistant” measures are in place, the pile will remain dry for several months. Here is a storage list that can be directly followed.

Storage List

• sealingImmediately tie the inner bag tightly after picking up the material, cover the outer box tightly, and never leave it open overnight.
• raiseKeep the pallet off the ground and wall, leave ventilation ducts, and avoid moisture on the ground.
• shadeThe temperature of the warehouse should not exceed 35 ℃, and it should be kept away from heating, drying rooms, and direct sunlight.
• moisture-proofAdd desiccants or dehumidifiers in humid areas, with a focus on monitoring during the rainy season.
• First In First OutEat early first to avoid a certain batch from forming lumps due to long-term pressure.
• Handle with careDo not apply heavy pressure or kick, to prevent particles from powdering and clumping.

Abnormal judgment

Frequently Asked Questions (FAQ)

Q: Can it be placed in an outdoor shed?
Answer: Not recommended, as large fluctuations in temperature and humidity can cause clumping and dampness.

Q: How to store small quantities?
Answer: Small packages can be used and taken at any time, and Sunlife hot melt adhesive supports small packages.

Q: Can lumps still be removed?
Answer: Improper storage is usually not within the scope of returns and exchanges, and proper protection is the most cost-effective.

The Sunlife hot melt adhesive from Guangzhou Sunlife Trading is well sealed and stored according to the list without clumping.