新闻中心
< p > on < a href = "http://www.sunlife888.com" > < strong > hot melt adhesive books < / strong > < / a > how to use, through the following questions can help you go less detours: < / p >
Binding equipment is usually installed and in use, and is rarely replaced. This can determine the type of book hot melt adhesive to be used, and add application details such as spraying, extrusion, manual application and detection systems, etc., to further meet the requirements of book binding. The time from the application of hot melt adhesive to bonding is very important.
Small-batch applications typically use common models, while large-batch applications can ensure that professional models can be manufactured in the standards of large mixers in the industry, without excessive inventory and at the same time save costs.
What kind of paper is book hot melt adhesive used for?
Once the purpose is defined, it is necessary to understand which specific paper materials have been selected.
Does
Book hot melt adhesive can be used for standard applications, as well as for other products or applications that require specific hot melt adhesive solutions. If there are multiple production sites but different book hot melt adhesives , then what differences there are at each site can ensure different grades, or the application standards are opportunities to improve the efficiency of using one grade.
If this issue is observed in the analysis, the selected hot melt adhesive needs to be consistent with the goal to be achieved. Hot melt adhesives may only be a small part of a product or packaging, but they can help improve the development of safety, production, waste and sustainability goals.
Finally, it is also necessary to pay attention to which national production standards you need to abide by in the binding production process.
The glue thread is too long and the tail is shaking glue, which is not because the glue is “bad”, but because the opening time, temperature, and glue amount are not properly matched. According to these three inspections, most of the wire drawing problems can be solved.
It’s not that difficult to change the glue for the glue installation machine in the graphic store Many graphic and text store owners are afraid of changinghot melt adhesive pellets——Afraid of blocking rubber hoses, afraid of temperature switching problems, and afraid of wasting glue. In fact, as long as you follow the steps, it can […]
The core of Guangzhou flatbed hot melt adhesive isMoisture and heat resistance, good leveling, strong initial adhesion, and adaptable opening timePriority selectionModified EVA (mass production) or PUR (high-end)Accurately match according to the substrate, equipment, and season, avoiding “soft in summer and brittle in winter, opening glue in the south”. 1、 Guangzhou climate pain points (key […]
The broken folding line of corrugated cardboard boxes is often related to the lack of reinforcement at the folding point and the brittle and hard adhesive layer. A high elasticity hot melt adhesive line can be added to the folding line to reinforce the weak points; The selection of glue prioritizes elasticity, and actual samples need to be confirmed based on the cardboard, equipment, and climate.
