新闻中心
From packaging to various product assemblies, packaging hot melt adhesive can be used in products to achieve stronger bonding between materials. Due to the adhesive properties of packaging hot melt adhesive, this bonding method is more durable than other bonding methods.
Hot melt adhesive is one of the few adhesive systems that allows glue applicators to control and automate their workflow. In other words, hot melt adhesives can adapt to almost any desired condition by controlling temperature, process, and speed.

One advantage of packaging hot melt adhesives in modern product assembly is that they can be applied using various techniques and methods. The method of applying hot melt adhesive will vary depending on the nature of the product, the cost and type of application equipment and hardware, labor costs, and the quality of the hot melt adhesive itself.
The product assembly company has found that hot melt adhesive is a good choice for the following reasons:
They are biodegradable, which in turn makes them recyclable. They do not produce solvent emissions. They will not cause wastewater problems. They do not emit air pollutants. The profit margin of hot melt product assembly is higher because a lighter adhesive coating is required to generate cohesion. They can adhere more products with faster production speed and better application accuracy. They bring added value: Hot melt adhesives are compatible with various additives such as UV inhibitors, waterproofing agents, flame retardants, antioxidants, and antibacterial agents.Whether using hot melt adhesive for packaging, automotive, printing materials, or any other adhesive application, details are important. The good case is that inefficient use of adhesive can lead to waste – the bad case is that it can cause system problems, thereby increasing costly downtime. One of the common problems encountered with hot melt […]
The opening time and solidification time are important specifications for selecting suitable EVA hot melt adhesive for specific applications. Choosing adhesive that meets the specifications will be one of the factors in achieving the required adhesive force. Opening time:Defined as the time it takes to apply adhesive to the surface of a material until it […]
Domestic in 2026Hot melt adhesive pelletsThe common trading range is roughly11000 to 26000 yuan per tonThe general sealed box type is lower end, the book and magazine adhesive type is in the middle, and the PUR or food contact level is significantly higher. The price difference is not arbitrarily determined, mainly determined by the proportion […]
The raised edges after composite should not be directly attributed to glue. This article investigates the interfaces of substrate, coating, composite, and curing one by one, helping to narrow down the scope of problems in packaging production sites. Core keywords: packaging composite adhesive, edge warping, composite process, substrate surface Sunlife The edge of the composite […]